Bluetooth Setup; Registering Bluetooth Unit - Kenwood KVT-516 Instruction Manual

Bluetooth Setup

Registers and selects Bluetooth unit.
1 Display the Bluetooth Setup screen
Touch
Menu" screen (page 61).
2 Setup each item
1
2
3
1 Sets cell-phone for Hands Free and Audio
player for Bluetooth Audio.
2 Sets the PIN code of the Bluetooth unit to
enter when registering (pairing) from the
cell-phone or audio player side.
3 Sets the speakers to output phone call
voice/ ringing tone/ Bluetooth audio.
( "Front Only")
"Front Only": Outputs from the front
speakers.
"All": Outputs from all the speakers.

Registering Bluetooth Unit

Registers the Bluetooth unit to be connected.
1
in the "Setup
2
⁄
• A new device cannot be registered if there are already 5
3
Display the Connect Device List screen
1
2
Search for a Bluetooth unit
1
1 Displays the registered Bluetooth unit.
Displays the busy service in red. Displays
the available service in gray.
2 Scrolls the name of the Bluetooth unit.
3 Searches for Bluetooth unit.
4 Registers a Bluetooth unit that cannot
be registered by normal register (pairing)
operation.
5 Returns to the previous screen.
Bluetooth units registered. Delete one of the registered
units. See <Deleting Bluetooth Unit> (page 82).
Select the Bluetooth unit to register
6
10
10
6 Displays the searched Bluetooth unit.
7 Scrolls the name of the Bluetooth unit.
8 Cancels searching of Bluetooth unit.
9 Starts search.
2
3
4
5
7 8
9
11
Next page 3
English 79