Setting Up The Hands-Free Phone - Kenwood KVT-516 Instruction Manual

Hands Free Unit Control

Setting Up the Hands-Free Phone

The Hands-Free system can be set as follows.
1 Display the Hands Free Setup screen
2 Setup each item
2
3
4
7
8
9
10
1 Moves to the "Hands Free Setup 2" screen.
2 Sets an automatic response time to pick-up
an incoming call. (
"Off": This function is disabled.
"0-99": Sets the incoming call ringing
duration (in seconds).
3 Sets the beep of the incoming call.
( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
4 Sets the beep of the incoming SMS.
( "ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
5 Returns to the Hands-Free Control screen.
6 Returns to the "Hands Free Setup 1" screen.
56 KVT-696/KVT-636DVD/KVT-516/KVT-546DVD
1
5
6
11
"8")
7 Sets whether to use cell-phone phonebook,
outgoing calls list and incoming calls list.
( "ON")
"ON": Yes.
"OFF": No.
8 Sets the SMS function. (
"ON": Use SMS function.
"OFF": SMS not available.
9 Registers the voice to select phone number
category with voice recognition.
See <Key Word Voice Registration> (page
58).
p Registers the phone number to Hands Free
Control screen preset button.
See <Phone Number Preset> (page 59).
q Returns to the Hands-Free Control screen.
⁄
• Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
"ON")