Calling By Voice Recognition - Kenwood KVT-516 Instruction Manual

Monitor with dvd receiver
Hide thumbs Also See for KVT-516:
Table of Contents

Advertisement

Calling by Voice Recognition

Calls by recognizing the registered voice.
• In order to perform voice recognition, voice must
be registered in the Phonebook data. See <Voice
Registration> (page 57). Or, to perform voice recognition
by Phone number category (Home, Office, Mobile etc.)
of Phonebook data, a key word voice must be registered.
See <Key Word Voice Registration> (page 58).
1
Display the Voice Recognition screen
2
Say the name registered in the PhoneBook
When a beep is heard, say the name within 2
seconds.
1 Cancels voice recognition.
If the voice recognition is succeeded and
there is only one phone number found:
2
Make a call.
2 Displays the phonebook list.
If you hear another Beep sound:
Say the key word within 2 seconds after the
Beep, or touch the [Phonebook List] button to
select the phone number.
Make a call.
• If there are more than one phone numbers registered
under the same name, and the key word voice is
registered for each phone number, you will hear another
beep. For how to register key word, see <Key Word Voice
Registration> (page 58).
If there are more than one phone numbers
registered under the same name, go to step
3.
3
Select a Phone number category
3
4
1
3 Calls the displayed phone number.
4 Creates an SMS to the displayed address.
5 Selects the Phone number category.
6 Scrolls the phone number.
7 Displays the Phonebook data list.
8 Returns to the Hands-Free Control screen.
4
Make a call
• A message is displayed if the voice is not recognized.
Read the message for the further operation.
5
See <SMS (Short Message Service)> (page
60).
6
7
8
English
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kvt-546dvdKvt-636dvdKvt-696

Table of Contents