Security Code Setup - Kenwood KVT-50DVDRY Instruction Manual

Monitor with dvd receiver
Hide thumbs Also See for KVT-50DVDRY:
Table of Contents

Advertisement

Setup Menu

Security Code Setup

You can set a security code to protect your
receiver system against theft.
• When the Security Code function is activated, it cannot
be released.
Note that your Security Code is in the 4 digit number
entered in your "Car Audio Passport" in this package.
1
Display the Security Code Setup screen
Touch
Menu" screen (page 58).
1
2
1 Displays the Security code input screen.
2 Turns the SI function on or off.
If turned "ON", the burglar alarm lamp
flashes when the vehicle ignition is off.
(
"ON")
2
Start Security Code setup
• If you have already completed the code registration, you
cannot touch
3
Enter a security Code
Input four-digit number.
72
KVT-522DVD/KVT-522DVDY/KVT-50DVDRY
in the "Setup
.
4
Register your security code
5
Reenter the security code
Reenter the same security code as that you
have entered in Step 3 for confirmation.
• If you enter a different security code, the screen returns
to Step 3 (for the first code entry).
6
Register the security code again
Now, your security code is registered.
If you press the Reset button or if you
disconnect your receiver from the battery after
the code registration, you need to enter the
registered security code.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kvt-522dvdKvt-522dvdy

Table of Contents