Chapter 4 Keys And Controls; Front Panel Overview - Kenwood RC-2000 Instruction Manual

FRONT PANEL OVERVIEW

There are 12 keys on the front panel. These keys are denoted as follows: L1 ~ L3 are the 3 keys to the left of the
display (from top to bottom); F1 ~ F6 are the 6 keys below the display (from left to right); the top most key to the right of
the display is the Power switch; R1 ~ R2 are the two keys below the Power switch, to the right of the display (from top
to bottom).
q L1 ~ L3 key
Press to activate or select the function shown on the
display to the right of each key.
8
KEYS AND CONTROLS
MOBILE CONTROLLER
w Tuning / MULTI/CH / RIT/SUB control
Normally, it is used to adjust the frequency. Press this
control to change the control mode. The current tuning
control mode status appears on the top right of the
display where "TUN" is Tuning control, "MLTI" is
MULTI/ CH control, and "RIT" is RIT/ SUB control.
RC-2000