Statesettings; Tcpsettings - D-Link NetDefend DFL-210 Cli Reference Manual

Network security firewall ver. 1.03
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

3.51.19. StateSettings

3.51.19. StateSettings
Description
Parameters for the state engine in the system.
Properties
ConnReplace
LogOpenFails
LogReverseOpens
LogStateViolations
LogConnections
LogConnectionUsage
MaxConnections_Dynamic
MaxConnections

3.51.20. TCPSettings

Description
Settings related to the TCP protocol.
Properties
TCPOptionSizes
TCPMSSMin
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
What to do when the connection table is full. (Default: Re-
placeLog)
Log packets that are neither part of open connections nor valid
new connections. (Default: Yes)
Log reverse connection attempts through an established con-
nection. (Default: Yes)
Log packets that violate stateful tracking rules; for instance,
TCP connect sequences. (Default: Yes)
Log connections opening and closing. (Default: Log)
Log for every packet that passes through a connection.
(Default: No)
Allocate the Max Connection value dynamically. (Default:
Yes)
Maximum number of simultaneous connections. (Default:
8192)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Validity of TCP header option sizes. (Default: ValidateLogBad)
Minimum allowed TCP MSS (Maximum Segment Size). (Default:
100)
Chapter 3. Configuration Reference
179

Advertisement

Table of Contents
loading

Table of Contents