Pipe - D-Link NetDefend DFL-210 Cli Reference Manual

Network security firewall ver. 1.03
Hide thumbs Also See for NetDefend DFL-210:
Table of Contents

Advertisement

3.39. Pipe

3.39. Pipe
Description
A pipe defines basic traffic shaping parameters. The pipe rules then determines which traffic goes
through which pipes.
Properties
Name
LimitKbpsTotal
LimitPPSTotal
LimitKbps0
LimitPPS0
LimitKbps1
LimitPPS1
LimitKbps2
LimitPPS2
LimitKbps3
LimitPPS3
LimitKbps4
LimitPPS4
LimitKbps5
LimitPPS5
LimitKbps6
LimitPPS6
LimitKbps7
LimitPPS7
UserLimitKbpsTotal
UserLimitPPSTotal
UserLimitKbps0
Specifies a symbolic name for the pipe. (Identifier)
Total bandwidth limit for this pipe in kilobits per second. (Optional)
Total packet per second limit for this pipe. (Optional)
Specifies the bandwidth limit in kbps for precedence 0 (the lowest
precedence). (Optional)
Specifies the packet per second limit for precedence 0 (the lowest
precedence). (Optional)
Specifies the bandwidth limit in kbps for precedence 1. (Optional)
Specifies the packet per second limit for precedence 1. (Optional)
Specifies the bandwidth limit in kbps for precedence 2. (Optional)
Specifies the packet per second limit for precedence 2. (Optional)
Specifies the bandwidth limit in kbps for precedence 3. (Optional)
Specifies the packet per second limit for precedence 3. (Optional)
Specifies the bandwidth limit in kbps for precedence 4. (Optional)
Specifies the packet per second limit for precedence 4. (Optional)
Specifies the bandwidth limit in kbps for precedence 5. (Optional)
Specifies the packet per second limit for precedence 5. (Optional)
Specifies the bandwidth limit in kbps for precedence 6. (Optional)
Specifies the packet per second limit for precedence 6. (Optional)
Specifies the bandwidth limit in kbps for precedence 7 (the highest
precedence). (Optional)
Specifies the packet per second limit for precedence 7 (the highest
precedence). (Optional)
Total bandwidth limit per group in the pipe in kilobits per second.
(Optional)
Total throughput limit per group in the pipe in packets per second.
(Optional)
Specifies the bandwidth limit per group in kbps for precedence 0
(the lowest precedence). (Optional)
147
Chapter 3. Configuration Reference

Advertisement

Table of Contents
loading

Table of Contents