Interface; Defaultinterface; Ethernet - D-Link NetDefend DFL-210 Cli Reference Manual

3.28. Interface

3.28. Interface
This is a category that groups the following object types.

3.28.1. DefaultInterface

Description
A special interface used to represent internal mechanisms in the system as well as an abstract "any"
interface.
Properties
Name
Comments

3.28.2. Ethernet

Description
An Ethernet interface represents a logical endpoint for Ethernet traffic.
Properties
Name
IP
Network
DefaultGateway
Broadcast
PrivateIP
NOCHB
MTU
Metric
DHCPEnabled
DHCPHostName
EthernetDevice
Specifies a symbolic name for the interface. (Identifier)
Text describing the current object. (Optional)
Specifies a symbolic name for the interface. (Identifier)
The IP address of the interface.
The network of the interface.
The default gateway of the interface. (Optional)
The broadcast address of the connected network. (Optional)
The private IP address of this high availability node.
(Optional)
This will disable sending Cluster Heartbeats from this inter-
face (used by HA to detect if a node is online and working).
(Optional)
Specifies the size (in bytes) of the largest packet that can be
passed onward. (Default: 1500)
Specifies the metric for the auto-created route. (Default: 100)
Specifies that DHCP should be enabled on this interface.
(Default: No)
Optional DHCP Host Name. Leave blank to use default name.
(Optional)
Hardware settings for the Ethernet interface.
Chapter 3. Configuration Reference
120