Igmprule - D-Link NetDefend DFL-210 Cli Reference Manual

3.25. IGMPRule

3.25. IGMPRule
Description
An IGMP rule specifies how to handle inbound IGMP reports and outbound IGMP queries.
Properties
Index
Name
Type
Action
SourceInterface
SourceNetwork
DestinationInterface
MulticastGroup
MulticastSource
RelayInterface
TranslateMGroup
GrpAllToOne
NewGrpIP
TranslateMSource
SrcAllToOne
NewSrcIP
Filter
LogEnabled
LogSeverity
Comments
The index of the object, starting at 1. (Identifier)
Specifies a symbolic name for the rule. (Optional)
The type of IGMP messages the rule applies to. (Default: Report)
Drop, Snoop, Proxy or PIM. (Default: Drop)
Specifies the name of the receiving interface to be compared to
the received packet.
Specifies the sender span of IP addresses to be compared to the re-
ceived packet.
Specifies the the destination interface to be compared to the re-
ceived packet. (Default: core)
Specifies the multicast group to be compared to the received pack-
et.
Specifies the multicast source to be compared to the received
packet.
Specifies the interface via which to relay IGMP messages.
Translate the multicast group for packets matching this rule.
(Default: No)
Rewrite all multicast groups to a single IP. (Default: No)
Translate the multicast group to this address.
Translate the multicast source for packets matching this rule.
(Default: No)
Rewrite all multicast sources to a single IP. (Default: No)
Translate the multicast source to this address.
Pass IGMP data not matching this rule to the next rule. (Default:
Yes)
Enable logging. (Default: No)
Specifies with what severity log events will be sent to the spe-
cified log receivers. (Default: Default)
Text describing the current object. (Optional)
116
Chapter 3. Configuration Reference