Dynamicroutingruleexportospf; Dynamicroutingruleaddroute - D-Link NetDefend DFL-210 Cli Reference Manual

3.17.2. DynamicRoutingRuleAddRoute

3.17.1. DynamicRoutingRuleExportOSPF

Description
An OSPF action is used to manipulate and export new or changed routes to an OSPF Router Pro-
cess.
Properties
ExportToProcess
SetTag
SetRouteType
OffsetMetric
LimitMetricRange
SetForward
Comments
3.17.2. DynamicRoutingRuleAddRoute
Description
A routing action is used to manipulate and insert new or changed routes to one or more local routing
tables.
Properties
Destination
OverrideStatic
OverwriteDefault
OffsetMetric
OffsetMetricType2
LimitMetricRange
Specifies to which OSPF Process the route change should be exported.
Specifies a tag for this route. This tag can be used in other routers for
filtering. (Optional)
The external route type. (Optional)
Increases the metric of the imported route by this value. (Optional)
Limits the metrics for these routes to a minimum and maximum value, if
a route has a higher or lower value then specified it will be set to the
specified value. (Optional)
IP to route over. (Optional)
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Specifies to which routing table the route changes to the OSPF
Process should be exported.
Allow override of static routes. (Default: No)
Allow overwrite of default route. (Default: No)
Increases the metric by this value. (Optional)
Increases the for Type2 routers metric by this value. (Optional)
Limits the metrics for these routes to a minimum and maximum
value, if a route has a higher or lower value then specified it will
be set to the specified value. (Optional)
Chapter 3. Configuration Reference
106