Kenmore 350 Series Owner's Manual page 34

Intermittent flow rate does not represent the maximum service flow rate used for determining the soften-
ers rated capacity and efficiency. Continuous operation at flow rates greater than the service flow rate
may affect capacity and efficiency performance.
OTHER SPECIFICATIONS
Type of ion exchange material (resin)
Amount of resin (cu. ft.)
Rated Softening Capacity (Grains @ Pounds Salt Dose)
Efficiency Rating (Grains / Pound of Salt @ Minimum Salt Dose)
Rated Service Flow Rate (gpm)
Pressure Drop at Rated Service Flow Rate (psi)
Intermittent Flow Rate @ 15 psi (gpm)
Max. Drain Flow Rate (gpm)
These systems conform to NSF / ANSI 44 for the specific performance claims as verified and substantiat-
ed by test data.
The efficiency rating is only valid at the minimum stated salt dosage. These softeners were efficiency
rated acocording to NSF / ANSI Standard 44.
34
Specifications
Questions? Call The Kenmore Water Line 1-800-426-9345
MODEL 38356 MODEL 39356
high capacity
0.92
14,200 @ 2.8
29,900 @ 8.8
35,600 @ 14.7 35,600 @ 14.7
5060 @ 2.8
8.0
14
8.5
2.0
FIG. 50
high capacity
0.92
14,200 @ 2.8
29,900 @ 8.8
5060 @ 2.8
8.0
14
8.5
2.0