Install Covers And Restart Water Heater - Kenmore 300 Series Owner's Manual

Install Covers and Restart Water Heater

INSTALL COVERS
After installing your water softener, replace the covers.
Angle the covers so the main cover clips onto the back
first, then bring down in front and clip on the two (2) tabs
inside the rim of the salt hole and lower the salt cover
closed. See Fig. 23.
RESTART THE WATER HEATER
Turn on the gas (or electric) supply to the water heater
and light the pilot.
YOUR PLUMBING INSTALLATION AND ELECTRICAL
WORK ARE NOW COMPLETE.
Questions? Call The Kenmore Water Line 1-800-426-9345
INSTALL COVERS
Salt Hole
Cover
Cover
(Main)
FIG. 23
17