Advertisement
Quick Links
Models: R7 - 7kW / 46kWh, R8 - 8kW / 57kWh, R10 - 10kW / 69kWh,
USER INSTRUCTIONS
PLEASE READ THIS LEAFLET CAREFULLY AND
RETAIN FOR FURTHER USE. NOTE ALSO THE
WARNING - THE SURFACES ON THIS HEATER CAN BE HOT.
•
This heater meets BS 3456 safety requirements. However, any heater type becomes hot in normal operation. Care
•
must be taken to ensure that prolonged skin contact with the heater does not occur.
WHERE YOUNG CHILDREN, INFIRM PERSONS, OR THE AGED ARE LIKELY TO BE LEFT UNSUPERVISED
IN THE VICINITY OF THE HEATER WE RECOMMEND THAT A GUARD IS FITTED. Contact your installer or the
manufacturer for further advice.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
THIS APPLIANCE IS EXTREMELY HEAVY. THE FLOOR MUST BE CHECKED TO ENSURE THAT IT IS CAPABLE
•
OF BEARING THE WEIGHT OF THE UNIT, UP TO 750KG (¾ TON). DO NOT UNDER ANY CIRCUMSTANCES
ATTEMPT TO MOVE OR REPOSITION THIS HEATER WITHOUT SEEKING EXPERT ADVICE.
• To maintain stability, it is essential that the heater is placed on a level surface.
• The heater must be installed where it is impossible for switches and other controls to be touched by a person using
a bath or shower.
• IMPORTANT - Due to the newness of materials the heater will produce a slight smell for the fi rst few days of
operation. ROOMS MUST BE WELL VENTILATED AND YOUNG CHILDREN, CAGED BIRDS, OR PERSONS
WITH RESPIRATORY COMPLAINTS MUST NOT REMAIN IN CLOSE PROXIMITY TO THE HEATER DURING
THE FIRST 48 HOURS OF THE COMMISSIONING PERIOD.
•
IF, DURING ANY REASSEMBLY OF THE HEATER, A PART OF THE THERMAL INSULATION SHOWS DAMAGE
OR DETERIORATION WHICH MAY IMPAIR SAFETY, IT SHOULD BE REPLACED BY AN IDENTICAL PART.
•
T he heater must stand at least 50mm clear of any walls and 150mm below ceilings.
ELECTRICAIRE
WARM AIR HEATING SYSTEM
R12 - 12kW / 80kWh, R15 - 15kW / 103kWh
IMPORTANT
INFORMATION GIVEN ON THE HEATER
Advertisement
Related Manuals for Dimplex Electricaire R7
Summary of Contents for Dimplex Electricaire R7
-
Page 1: User Instructions
ELECTRICAIRE WARM AIR HEATING SYSTEM Models: R7 - 7kW / 46kWh, R8 - 8kW / 57kWh, R10 - 10kW / 69kWh, R12 - 12kW / 80kWh, R15 - 15kW / 103kWh USER INSTRUCTIONS IMPORTANT PLEASE READ THIS LEAFLET CAREFULLY AND RETAIN FOR FURTHER USE. -
Page 2: Principles Of Operation
USER INSTRUCTIONS CONTROL FUNCTIONS - see Fig. A PRINCIPLES OF OPERATION 1. INPUT CONTROL The warm air system is designed to operate on cheap rate electricity. The input controller is a thermostat which regulates the amount The heater takes in energy when electricity tariffs are low, and of energy taken by the heater during the hours when cheap rate retains it in the insulated core. - Page 3 MAINTENANCE A washable fi lter is fi tted to ensure the warm air distributed is clean and free from dust. The fi lter is located in the detachable lower panel and should be washed in warm soapy water at least twice a year (see Fig.
- Page 4 Should you require after sales information or assistance with this product please go to www.dimplex.co.uk where you will fi nd our self help guide by clicking on ‘After Sales’ or ring our help desk on 0845 600 5111 (UK) or 842 4833 (ROI). It would assist us if you can quote the model number, series, date of purchase, and nature of the fault at the time of your call.