Keating Of Chicago IFM Service Instructions

S E R V I C E I N S T R U C T I O N S
www.keatingofchicago.com
REPLACING PART #032242 (Lighted Rocker Switch)
WITH PART #058328 (Non-lighted Rocker Switch)
Please select the wiring diagram for your fryer and wire the new switch as shown
Model IFM
remove the female flag
connectors from the
remove the female flag
hot terminals of the
connectors from the
old dpst rocker switch
neutral terminal of
as shown.
the old dpst rocker
switch as shown.
Model BB
the wire going to the neutral terminal of lighted
dpst rocker switch should be removed. this wire
will be absent after installing the new switch.
remove the female flag
connectors from the hot
terminals of the old dpst
rocker switch as shown.
connect the female flag
connectors with a male to
ring tongue terminal
adapter and connect them
to the screw terminals of
the new white on/off dpst
rocker switch as shown.
connect the female flag
connectors with a male to
ring tongue terminal
adapter and connect them
to the screw terminals of
the new white on/off dpst
rocker switch as shown.
Part # 058545
1-800-KEATING
wire color codes
bl − black
bu − blue
rd − red
yl − yellow
wh − white
place a piece of heat
shrink tube around the
terminal codes
female flag connector
h − hot
and warm gently with
n − neutral
a lighter until it is
compressed. the heat
shrink tube is not
shown in the diagram.
wire color codes
bl − black
bu − blue
rd − red
yl − yellow
wh − white
terminal codes
h − hot
n − neutral
058545 Switch Replacement 4/07