Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung LN-S2641D Owner's Instructions Manual

Operation

Turning the TV On and Off

Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
Press the POWER button on the remote control.
You can also use the POWER
1. Press the POWER
The message "Menu language, Channels and Time will be set." is displayed.
Press the ENTER
automatically displayed.
2. Press the ENTER
Press the or buttons to select language, then the ENTER
"Select the antennas to memorize." menu is automatically displayed.
3. Press the or buttons to memorize the channels of the selected connection.
Press the ENTER
If the antenna is connected to ANT 1 (AIR), select "Air" and if it is connected to
ANT 2 (CABLE), select "Cable".
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable".
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the or
Contact your local cable company to identify the type of cable system that exists in your
particular area.
4. The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER
"Select the clock mode." menu is automatically displayed.
To stop the search before it has finished, press the ENTER
5. Press the ENTER
Press the or buttons to select "Manual" or "Auto", then the ENTER
Switches the Daylight Saving Time function on or off.
English-13
button on the front of the panel.
button on the remote control.
button, then "Select the language of the OSD" menu is
button to enter the language.
button to select "Start".
button, then press the ENTER
button when channel memorization is complete.
button.
button.
button.
button with stop selected.
button.