IMPORTANT PRECAUTIONS – continued
PRECAUTIONS
Water Supply (Cold Water Only)
• Water hose must be at least 3/4 inch in
diameter.
• Flow rate of water supply must not fall
below 2.5 GPM (gallons per minute).
• Flow rate can be determined by running
the water for one minute into an empty"
5-gallon container.
ASSEMBLY INSTRUCTIONS
4
Step 1
Step 1
Step 1
Step 1
Step 1
Step 3
Step 3
Step 3
Step 3
Step 3
• The water supply temperature must not
exceed 104°F/40°C.
• Never use the pressure washer to draw
in water contaminated with solvents, e.g.
paint thinners, gasoline, oil, etc.
• Always prevent debris from being drawn
into the unit by using a clean water source.
•
Save these instructions!
Step 2
Step 2
Step 2
Step 2
Step 2