Kambrook KFP90 Manual page 13

INGREDIENTS
ONIONS
CARROTS,
ZUCCHINI,
EGGPLANT,
BANANAS
CAPSICUMS
MUSHROOMS
APPLES, PEACHES Peel if desired, remove the stone and quarter the fruit. Lie the
BEANS
CHEESE
CABBAGE
LETTUCE
RAW MEAT, FISH,
CHICKEN
COOKED MEATS, Pack the feed tube snugly placing meat in the feed tube vertically.
CABANOSSI,
SALAMI
CUCUMBERS
POTATOES
PROCEDURE
Peel the onions and halve if too large to fit into the feed tube.
Place the onions in the feed tube, cut edge down. Process, exerting
firm pressure on the food pusher.
Prepare the foods in the usual way. For rings arrange foods
vertically in the feed rube, cutting them so they are even in height.
For slices arrange foods horizontally in the feed tube.
Process by exerting firm pressure on the food pusher.
Remove the core and seeds. Halve the capsicums if necessary and
arrange them vertically in the feed tube. Process using firm
pressure on the food pusher.
Wipe the mushrooms and pack in the feed tube on their sides.
Process using firm pressure on the feed pusher.
quarters on their sides in the feed tube and process using firm
pressure of the food pusher.
Prepare the beans. Cut into lengths and pack horizontally into the
feed tube. Process using firm pressure on the food pusher.
Cut the cheese into pieces large enough to just fit the feed tube.
Process using light pressure on the feed tube to prevent cheese
crumbling.
Cut cabbage into wedges to fit feed tube and process using firm
pressure.
Separate the leaves of the lettuce and wash and dry. Roll the leaves
firmly and pack into the feed tube. Process using firm pressure.
Trim meat of fat and gristle and cut to fit snugly in the feed tube.
Freeze until partly frozen. Process using firm pressure.
Process using firm pressure. For more even slicing remove sausage
skins first.
Trim the ends of the cucumber and cut into lengths to fit the tube
vertically. If the cucumber is too wide, scoring it length wise with a
fork will make it more pliable.
Peel the potatoes and cut into pieces if necessary to fit the feed
tube. Process using firm pressure.
13