Getting Started; To Put Batteries In Remote Control - JVC FS-5000 Instructions Manual

Getting Started

Accessories
Check that you have all of the following items, which are supplied with the System.
Power Cord (1)
AM Loop Antenna (1)
Remote Control (1)
Batteries (2)
FM Wire Antenna (1)
Speaker Cords (2)
If any of these items are missing, contact your dealer immediately.
How To Put Batteries In the Remote Control
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.
CAUTION: Handle batteries properly.
To avoid battery leakage or explosion:
• Remove batteries when the Remote Control will not be used for a long time.
• When you need to replace the batteries, replace both batteries at the same time with new ones.
• Don't use an old battery with a new one.
• Don't use different types of batteries together.
Using the Remote Control
The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m (23 feet) away.
You need to point the Remote Control at the remote sensor on the System's front panel.
R6P(SUM-3)/AA(15F)
AHB.
SUPER PRO
POWER
PRESET
TUNING DOWN MULTI CONTROL UP CLOCK SLEEP
OPEN/CLOSE
MD/TAPE TUNER CD
AUX BAND
TIMER/SNOOZE
Remote sensor
VOLUME
STANDBY
ULTRA COMPACT COMPONENT SYSTEM
PHONES
2