Basic Md Operations - JVC CA-WMD90R Instructions Manual

MD playback sequence on MD deck B
When 3 MDs are loaded in MD deck B loading slots, they are
played in one of the following sequences.
• When MD 1 is pressed : MD 1 ] MD 2 ] MD 3 (then stops)
• When MD 2 is pressed : MD 2 ] MD 3 ] MD 1 (then stops)
• When MD 3 is pressed : MD 3 ] MD 1 ] MD 2 (then stops)
* If no MD is in the loading slot, MD deck B skips that slot.

Basic MD Operations

While playing an MD, you can do the following operations.
To stop playback for a moment
When using MD deck A: Press # / 8 on MD deck A (or
MD A 6 on the remote control).
To resume play, press the button again.
When using MD deck B: Press # / 8 on MD deck B (or
MD B 6 on the remote control).
To resume play, press the button again.
To locate a particular point in a track during play
On the unit:
Rotate the left jog dial.
• Counterclockwise (1): Fast reverses the tracks.
• Clockwise (¡) :
On the remote control:
Press and hold 4 1 or ¢ ¡.
• 1 : Fast reverses the tracks.
• ¡ : Fast forwards the tracks.
To go to another track
On the unit:
Rotate the right jog dial.
• Counterclockwise (4): Goes back to the beginning of
the current or previous tracks.
• Clockwise (¢) : Skips to the beginning of the next
tracks.
On the remote control:
Press 4 1 or ¢ ¡ repeatedly.
• 4 : Goes back to the beginning of the current or
previous tracks.
• ¢ : Skips to the beginning of the next or succeeding
tracks.
Fast forwards the tracks.
To go to another track directly using the number
buttons
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10 , +10, +10, then 2.
To change the display Indications
Each time you press DISPLAY/CHARA, the indications in
the main display changes as follows:
Before play:
For MD deck A
Track No. &
playing time
For MD deck B
Track No. &
playing time
During play:
Track No. &
Elapsed playing time
If a title cannot be shown at a time
The unit scrolls the title.
If there is no title
"NO TITLE" will appear when you change the display indication.
To exchange MDs during playback of another (ONLY
for MD deck B)
If MDs are exchanged during playback, playback will stop
after playing all newly inserted MDs.
1 Press 0 for MD deck B to open the disc loading slot
cover.
2 Replace MDs.
3 Press 0 for MD deck B again to close the disc loading
slot cover.
When you open the MD loading slot cover to replace
MDs
The slot of the currently playing appears empty. Do not put any
MD in this slot. If you put an MD in this slot and close the cover,
the cover automatically opens ("OCCUPIED" appears in the main
display).
– 25 –
Disc Title
Remaining
recording time
on the disc
Disc Title
Track Title