KDC-CX85/CPS85 MICROCOMPUTER’S TERMINAL DESCRIPTION UPD 7805GCB82T : IC1 (X13-9790-00) Pin Name Function Description Processing Operation P15/AN15 Not used. P16/AN16 Not used. P17/AN17 Not used. AVss A/D converter reference ground terminal P130/ANO0 RSTOUT Reset output H: Reset P131/ANO1 REQH1 Communication request output to CH1...
Page 4
KDC-CX85/CPS85 MICROCOMPUTER’S TERMINAL DESCRIPTION Pin Name Function Description Processing Operation Not used. Not used. Not used. Not used. Not used. Not used. Not used. Not used. Not used. Not used. Not used. P120/RTP0 Not used. P121/RTP1 Not used. P122/RTP2 Not used.
Page 5
KDC-CX85/CPS85 MICROCOMPUTER’S TERMINAL DESCRIPTION UPD 784214GC-066 : IC7 (X32-4680-00) Pin Name Function Description Processing Operation P120/RTP0 LDON Pickup laser ON H: Laser ON P121/RTP1 TBCO Tracking filter coefficient switching signal output H: Gain-up mode P122/RTP2 TBCI Tracking filter coefficient switching signal input...
Page 6
KDC-CX85/CPS85 MICROCOMPUTER’S TERMINAL DESCRIPTION Pin Name Function Description Processing Operation P21/TxD1/SO1 DATAC Data output from the changer P22/ASCK1/SCK1 HCLK Communication clock input from H/U P23/PCL REQC Communication request to H/U P24/BUZ CHMUTE Audio mute output to H/U L: Mute ON...
Page 7
KDC-CX85/CPS85 MICROCOMPUTER’S TERMINAL DESCRIPTION Pin Name Function Description Processing Operation Positive power voltage connection terminal P100/TI5/TO5 RAMTEST Production RAM check mode P101/TI6/TO6 REQH Communication request from H/U P102/TI7/TO7 SP/LO+ Spindle/Loading control terminal+ P103/TI8/TO8 SP/LO- Spindle/Loading control terminal - P30/TO0 ELV+...
Page 8
KDC-CX85/CPS85 ADJUSTMENT LPS initial position adjustment procedure Connect the changer to the H/U. While holding the maga- zine eject button of the changer, press the reset button of the H/U and, in about 1 second, release the magazine eject button. Press the CD button of the H/U to enter the E-88 mode.
Page 9
PC BOARD (COMPONENT SIDE VIEW) (FOIL SIDE VIEW) X13-9730-00/9740-00 (J74-0987-01) X13-9790-00 (J74-1037-02) X13-9730-00/9740-00 (J74-0987-01) X13-9790-00 (J74-1037-02) TO CH2 TO CH2 TO H.U. TO H.U. CH-MUTE2 CH-MUTE2 REQH2 REQH2 AGND2 AGND2 REQC2 REQC2 CH-MUTE CH-MUTE DATAC2 DATAC2 DATAH2 DATAH2 CH-CON CH-CON REQCO REQCO DATACO...
Page 11
R5 100 supply circuit) before the appliance is returned to the customer. R3 100 • DC voltages are as measured with a high impedance voltmeter. Values may vary slightly due to variations between individual instruments or/and units. R1 100 KDC-CX85/CPS85...
KDC-CX85/CPS85 EXPLODED VIEW (UNIT) X13-9790 2.6x6 N09-4143-05 Ø BLACK N80-3008-45 Ø CAP1 N09-4186-25 SILVER B58-1275-04 Parts with the exploded numbers larger than 700 are not supplied.
Page 19
G01-2778-04 TORSION COIL SPRING G01-2779-04 TORSION COIL SPRING G01-2781-04 COMPRESSION SPRING G01-2782-14 TORSION COIL SPRING G01-2783-14 EXTENSION SPRING G01-2784-04 EXTENSION SPRING G01-2785-04 EXTENSION SPRING G01-2789-14 EXTENSION SPRING G01-2808-04 EXTENSION SPRING G01-2809-14 EXTENSION SPRING K1:KDC-CX85 M1:KDC-CPS85 E1:KDC-CPS85 indicates safety critical components.
Installation Size (WxHxD) ...................... 250x80x202mm (9-13/16x3-1/8x7-15/16 in.) Weight .......................... 2.3kg (5.1lbs) KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. KENWOOD CORPORATION 14-6, Dogenzaka 1-chome, Shibuya-ku, Tokyo 150-8501 Japan KENWOOD SERVICE CORPORATION KENWOOD ELECTRONICS ITALIA S.p.A.