How To Read This Manual - JVC CA-DXJ21 Instructions Manual

Playable Disc/File Types
DIGITAL VIDEO SUPER VIDEO
√
The " " in the list below shows available disc/file types.
Recording format
CD-R/
-RW
CD-DA (normal CD)
VCD/SVCD
DVD Video
DVD Audio
DVD-VR
Audio file:
MP3/WMA/WAV
Video file:
MPEG-1/MPEG-2/
ASF/DivX
Still picture file:
JPEG
*1 Recorded with "ISO 9660" format.
*2 Recorded with "UDF-Bridge" format.
*3 Not applicable for +R/+RW.
In addition to the above discs/files, this System can play
back audio data recorded on CD-Extra and DVD/CD Text.
• The following discs cannot be played back:
DVD-RAM, CD-I (CD-I Ready) and Photo CD.
Playing back these discs will generate noise and damage
the speakers.
• DVD Logo is a trademark of DVD Format/Logo Licensing
Corporation.
• In this manual, "file" and "track" are interchangeably used
for AV file operations.
• It is possible to play back finalized +R/+RW (DVD Video
format only) discs.
Caution for DualDisc playback:
The Non-DVD side of a "DualDisc" does not comply
with the "Compact Disc Digital Audio" standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
About color system
This System accommodates both NTSC and PAL system
and can play back discs/files recorded in either system.
To change the color system, see page 6.
1
Introduction
INFO
COMPACT
DIGITAL AUDIO
Media type
DVD-R/ USB mass
*1
-RW, +R/ storage class
*2
+RW device
√
— —
√
— —
√
— —
√
— —
√ *3
— —
√ √ √
√ √ √
√ √ √
Note on Region Code
DVD players and DVD Video have their own Region Code
numbers. This System can play back only DVD Video with an
appropriate Region Code number.
• For details, see "Specifications" on page 47.
EX.: For Southeast Asia
Audio formats
The System can play back the following digital audio
formats.
• LPCM (Linear PCM),
DTS (Digital Theater Systems), MPEG Audio, MLP
(Meridian Lossless Packing)

How to Read This Manual

• Button and control operations are explained in the table
below.
• Some related tips and notes are explained later in the
sections "Learning More about This System" and
"Troubleshooting," but not in the same section
explaining the operations (
content has some information).
Indicates that you press the button briefly.
Indicates that you press the button briefly
and repeatedly until an option you want is
selected.
Indicates that you press one of the buttons.
Indicates that you press and hold the button
2
sec.
for a specified period.
The number inside the arrow indicates the
period of a press (in the example, 2 seconds).
Indicates that you turn the control toward the
specified direction(s).
Indicates that this operation is only
Remote
ONLY
possible using the remote control.
Indicates that this operation is only
possible using the main unit.
Main Unit
ONLY
DIGITAL (Dolby Digital),
indicates that the
INFO