Page 1
INSTRUCTIONS MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS 7 /R /R P 3 /D IS C KV-RA2 KV-RA2 KV-RA2 For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference.
LISTENING TO YOUR CAR RECEIVER ... 8 SOUND ADJUSTMENT ... 9 MAINTENANCE... 10 TROUBLESHOOTING ... 11 SPECIFICATIONS ... 12 FEATURES The KV-RA2, when used with a JVC CD changer and VCR, provides high quality and high- powered sound from your existing receiver.
LOCATION OF CONTROLS Display unit 7/RND/RPT 3/DISC+ FUNC 1 Volume button (+, –): Adjusts the volume level or sound adjustment level. 2 ¢, 4 button: Used for various CD playback modes. Fast-forwards or rewinds a video tape. 3 SEL (select) button: Calls up the sound adjustment mode. 4 Display 1 Disc number indicator (1–12) 2 Track number indicator (1–99)
BASIC OPERATIONS Before operating this unit, see the instructions supplied with the other components connected to this unit. Display unit FUNC 7/RND/RPT 3 Display unit Remote controller FUNC Adjust the sound as you want. (See page 9.) To drop the volume in a moment Press briefly.
CD CHANGER OPERATIONS You can connect one of the JVC CD changer CH-X series. Playing CDs Remote controller Display unit FUNC 7/RN Note: When all the tracks on the first disc have been played, the second disc starts playing automatically from the first track.
To go to the next or previous tracks Display unit Remote controller To fast-forward or reverse the track Selecting CD playback modes To play the tracks at random Display unit only FUNC 7/RND/RPT 3/DISC+ Mode RND indicator RND1 Lights RND2 Flashes To play the tracks repeatedly FUNC 7/RND/RPT 3/DISC+...
You can connect a JVC VCR (ex. KZ-V10). Before you start... • Turn on a monitor set or TV set connected to the VCR and set it to its external input to watch picture from the VCR. • Insert a video tape into the VCR.
LISTENING TO YOUR CAR RECEIVER Turn on your car receiver. Display unit FUNC 7/RN Operate your car receiver. For details, refer to the instructions supplied with the car receiver. Note: Do not adjust the sound (bass, treble, fader and balance) on your car receiver. When you want to adjust the sound, see page 9.
SOUND ADJUSTMENT You can adjust the sound characteristics to your preference. Display unit only Indication VOL (volume) Adjusts the volume. BAS*(bass) Adjusts the bass. TRE*(treble) Adjusts the treble. FAD**(fader) Adjusts the front and rear speakers balance. R06 (rear only) — F06 (front only) BAL (balance) Adjusts the left and right speakers balance.
MAINTENANCE Battery replacement When the remote-controllable range becomes narrower, the battery should be replaced. (Battery life is about 1 year with normal use.) (Back side) Lithium coin battery (Product number: CR2025) (Back side) WARNING: • Store the battery in a place which children cannot reach. If a child accidentally swallows the battery, immediately consult a doctor.
TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms • Sound cannot be heard from the speakers. • Sound is distorted while you are listening to the car receiver (AUX).
SPECIFICATIONS AMPLIFIER SECTION Maximum power output: Front: 40 watts per channel Rear: 40 watts per channel Continuous power output (RMS): Front: 15 watts per channel into 4 , 40 to 20,000 Hz at no more than 0.8% total harmonic distortion. Rear: 15 watts per channel into 4 , 40 to 20,000 Hz at no more...
Page 13
Having TROUBLE with operation? Please reset your unit Refer to "How to reset your unit" Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvcservice.com We can help you! VICTOR COMPANY OF JAPAN, LIMITED EN, SP , FR 0199MNMMDWTKR...