Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) English Unit parts For your safety Please fold out illustration page at the front Before you use the cleaner for the first time, read these operating instructions and take...
English Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) Check the oil level Relief valve, pressure switch and safety valve are set and sealed in the factory. Fig. 1 – 3 Adjustments are made only by Customer Screw out the fastening screws on the Service.
Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) English Using the cleaner for the Venting the unit To vent the unit, unscrew the nozzle and first time leave the unit running until the water exits with no air bubbles.
Page 9
English Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) Selecting the type of spray Recommended cleaning methods Spray detergent sparingly over the dry The handgun must be closed. surface to be cleaned and let it take Rotate the housing of the nozzle until the effect but not dry out.
Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) English Protection from sub-zero Each time before operating temperatures the cleaner Caution! Check connecting cable for damage Water which has frozen in the cleaner (risk of getting an electric shock), have can destroy parts of it.
English Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) Troubleshooting Pump is leaky Three drops per minute are allowable and can appear on the underside of the Danger! cleaner. Seek the help of Customer Before any repair work is undertaken, Service if leaks are more serious.
Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) English EU Declaration of Conformity We hereby declare that the equipment described below conforms to the relevant fundamental safety and health requirements of the appropriate EU Directives, both in its basic design and construction as well as in the version marketed by us.
English Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) Technical Specifications HD 645 HD 645 HD 645 1.150-500/-501 1.150-502 1.150-503/-504 Mains connection Voltage Type of current 1~50 1~50 Connected load Supply fuse (delayed-action)
Page 14
Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) English Technical Specifications HD 650 SX HD 690 SX 1.150-411/-412 1.151-411 HD 650 HD 690 1.150-121/-311 1.151-112/-311 Mains connection EU I Voltage Type of current...
Page 15
English Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) Technical Specifications HD 650 SX 1.150- -201 -202 -203 -204 HD 650 1.150- HD 658 1.214- -101 -102 -103 -104 -109 -114 -101 -103...
Page 16
Operating Instructions HD 645 / HD 650 (SX) / HD 658 / HD 690 (SX) English Technical specifications HD 690 SX 1.151- -201 -202 -203 HD 690 1.151- -101 -102 -103 -107 -108 -109 Mains connection EU I EU II...