Introduction; Jam Error Codes; Jam 0 - Xerox Phaser 3300 Servce Manual

Error Messages and Codes

Introduction

Jam Error Codes

JAM 0

3-2
This chapter describes error messages that appear on the CWIS status
window or the Control Panel display to indicate the machine's status or errors.
These error indications serve as the entry point into the troubleshooting
process.
Troubleshooting of problems not directly indicated by or associated with an
error message or error code is covered in "General Troubleshooting" on
page 4-1. Print quality problems are covered in "Print-Quality
Troubleshooting" on page 5-1.
Description
1. Paper does not leave the tray.
2. Jam-0 occurs if the paper feeds into the printer.
Exit Sensor
Pressure Roller
Check and Cause
1. Check the Solenoid.
2. Check the surface of the roller-pickup
for foreign matter.
OPC
LSU CR
Fuser
Transfer Roller
Cover Open
Sensor
Empty Sensor
Solution
1. Replace the solenoid.
2. Clean with soft cloth dampened with
water.
DR
Toner Cartridge
SR
PTL
s3300mfp-067
MP Sensor
Feed Roller
Feed Sensor
Phaser 3300MFP Service Manual