APC UPS AP9630 User Manual: Local Access To The Command Line Interface; Main Screen; Sample Main Screen; Information And Status Fields

Apc network card user manual.
Hide thumbs

Local access to the command line interface

For local access, use a computer that connects to the Management Card through the serial port to access
the command line interface:
1. Select a serial port at the computer and disable any service that uses the port.
2. Connect the provided serial cable (APC part number 940-0299) from the selected port on the
computer to the configuration port at the Management Card.
3. Run a terminal program (e.g., HyperTerminal), and configure the selected port for 9600 bps, 8
data bits, no parity, 1 stop bit, and no flow control.
4. Press
Main Screen
Sample main screen
Following is an example of the screen displayed when you log on to the command line interface at the
Management Card.
Schneider Electric
(c)Copyright 2009 All Rights Reserved
: Test Lab
: Don Adams
Location : Building 3
Up Time
: 0 Days, 21 Hours, 21 Minutes
Information and status fields
Main screen information fields.
• Two fields identify the APC operating system (AOS) and application (APP) firmware versions.
The application firmware name identifies the device that connects to the network through this
Management Card. In the example above, the Management Card uses the application firmware for
a Symmetra UPS.
Network Management Card AOS
Symmetra APP
• Three fields identify the system name, contact person, and location of the Management Card. (In
the Web interface, select the Administration tab, General in the top menu bar, and
Identification in the left navigation menu to set these values.)
: Test Lab
Contact: Don Adams
Location: Building 3
. At the prompts, enter your user name and password.
UPS Network Management Card 2 User's Guide
Network Management Card AOS
Symmetra APP
Date : 10/30/2009
Time : 5:58:30
User : Administrator
Stat : P+ N+ A+

   Also See for APC UPS AP9630

   Related Manuals for APC UPS AP9630

This manual also for:

Ups ap9631

Comments to this Manuals

Symbols: 0
Latest comments: