JVC 0105MOC-MW-SC Instructions

DVD PLAYER Warnings, Cautions and Others
XV-N320B
XV-N322S
INSTRUCTIONS
®
V I D E O
GNT0059-004A[EK]
EN 0105MOC-MW-SC
©2005 Victor Company of Japan, Limited
Region code of DVD VIDEO
This player can play back DVD VIDEO discs
whose region code numbers include "2."
Examples of playable DVD VIDEO discs:
1 2
1 2 3
ALL 2 2 5
4 5 6
3 4
The player's region code is printed on the rear of
the player
Note of Color system format
This player accommodates the PAL system, and
also can play back discs recorded with NTSC
CAUTION
system. (NTSC video signals are converted to an
To reduce the risk of electrical shocks, fire, etc.:
PAL signal and output.)
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
Supplied accessories
If anything is missing, consult your dealer
Caution –– STANDBY/ON button!
immediately.
Disconnect the mains plug to shut the power off
• Remote control (x 1)
• R6(SUM-3)/AA(15F) battery (x 2) completely. The STANDBY/ON button in any
position does not disconnect the mains line. The power
can be remote controlled.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no
user serviceable parts inside the unit; leave all
servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when
open and interlock failed or defeated. Avoid direct
exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.
1
Turning on the power Initial setup
When you turn on the player for the first time after
Inserting the AC power plug
purchase, the following message appears on the TV
After all other connections have been made, insert the
screen.
AC power plug to the wall outlet firmly.
EXECUTE DVD PLAYER SETUP? - BASIC PICTURE/AUDIO
SETTING
Installing the batteries in the remote control
YES - PRESS ENTER NO - PRESS CANCEL
Open the compartment cover, and place the two
Before enjoying this player, make the initial settings as
supplied R6(SUM-3)/AA(15F) batteries in the remote
follows:
control according to the polarity markings ("+" and "–")
inside the compartment. Then replace the cover. 1
Press ENTER.
DVD PLAYER SETUP
MENU LANGUAGE ENGLISH
AUDIO LANGUAGE ENGLISH
SUBTITLE ENGLISH
ON SCREEN LANGUAGE ENGLISH
ENGLISH
FRENCH
GERMAN
2 Press 5/∞ to select the on-screen language for
the preference displays, etc., then press ENTER.
DVD PLAYER SETUP
MONITOR TYPE 4:3 L.B.
16:9
PICTURE SOURCE AUTO
4:3 LB
4:3 PS
SCREEN SAVER ON
CONNECTIONS SCART RGB
BACKGROUND
The batteries will last about six months with normal use. ST ANDARD
If the functions of the remote control become erratic,
replace the batteries.
Press 5/∞ to select the monitor type, then press
3
ENTER.
Precautions of the safe use of batteries
• For a normal (conventional) TV, select "4:3 LB" or
Observe the following precautions for the safe use of
"4:3 PS." (See "MONITOR TYPE" in "Initial
batteries. If they are used improperly their lives will be
settings.")
shortened, they may burst or their contents may leak.
• For a wide-screen TV, select "16:9."
• Remove the batteries from the remote control if it is
not going to be used for a long period of time.
DVD PLAYER SETUP
• Remove dead batteries and dispose of them
DIGITAL AUDIO OUTPUT DOLBY DIGITAL/PCM
PCM ONLY
properly.
ANALOG DOWNMIX DOLBY PROLOGIC
DOLBY DIGITAL/PCM
• Never leave dead batteries lying around, take them STREAM/PCM
D.RANGE CONTROL ON
apart, mix them with other refuse, or throw them into OUTPUT LEVEL STANDARD
an incinerator.
• Never touch liquid that has leaked out of a battery.
• Do not mix new and old batteries, or batteries of
Press 5/∞ to select a desired digital output
4
different types, when placing them.
signal type, then press ENTER.
Set this item correctly according to the logo on your
Turning on and off the player
receiver or decoder.
(If you do not connect the player to such a device,
Press STANDBY/ON.
press ENTER to finish the setting.)
• Receiver/decoder bearing Dolby Digital logo and
no DTS, select "DOLBY DIGITAL/PCM."
• Receiver/decoder bearing both Dolby Digital and
DTS logos, select "STREAM/PCM."
• Receiver/decoder bearing neither Dolby Digital nor
DTS logo, or digital recorder, select "PCM ONLY."
To bring up the DVD PLAYER SETUP display later
Press SET UP for a few seconds until the DVD PLAYER
SETUP display appears.
5
CAUTION: To prevent malfunction of the player
• Do not block the ventilation openings or holes. (If the • There are no user-serviceable parts inside. If
ventilation openings or holes are blocked by a newspaper anything goes wrong, unplug the power cord and
or cloth, etc., the heat may not be able to get out.) consult your dealer.
• Do not place any naked flame sources, such as • Do not insert any metallic objects, such as wires,
lighted candles, on the apparatus. hairpins, coins, etc. into the player.
• When discarding batteries, environmental problems • Do not block the vents. Blocking the vents may
must be considered and local rules or laws governing damage the player.
the disposal of these batteries must be followed strictly.
To clean the cabinet
• Do not expose this apparatus to rain, moisture, dripping
• Use a soft cloth. Follow the relevant instructions on
or splashing and that no objects filled with liquids, such
the use of chemically-coated cloths.
as vases, shall be placed on the apparatus.
• Do not use benzene, thinner or other organic solvents
and disinfectants. These may cause deformation or
Caution: Proper Ventilation
discoloring.
To avoid risk of electric shock and fire and to protect
from damage, locate the apparatus as follows:
Front: No obstructions and open spacing. Playable discs
Sides: No obstructions in 3 cm from the sides.
Top: No obstructions in 5 cm from the top.
• DVD VIDEO, Audio CD, Video CD, SVCD
Back: No obstructions in 15 cm from the back.
Bottom: No obstructions, place on the level surface.
V I D E O
Spacing 15 cm or more
• DVD-R/-RW written in the DVD VIDEO format
XV-N320B/XV-N322S
• CD-R/RW written in the SVCD, Video CD or Audio CD
format
Front
• CD-R/RW written in MP3/JPEG in accordance with
Wall or the "ISO 9660" format
obstructions
Supported Digital audio formats:
Stand height
Linear PCM, MPEG Multichannel, Dolby Digital, DTS (Digital
5 cm or more
Theater Systems)*
NOTES
Floor • If a disc gets dirty, scratched or warped, or due to the
disc characteristics or recording conditions, the
Precautions
player may not be able to play back such discs.
Notes on the power cord
• The player can play back audio signals recorded in
• When you are away on travel or otherwise for an extended
MIX-MODE CD, CD-G, CD-EXTRA and CD TEXT.
period of time, remove the plug from the wall outlet. A
• With some discs, operations may not be possible.
small amount of power (1.0 W) is always consumed while
* To play back DTS-encoded DVD VIDEO or DTS-
the power cord is connected to the wall outlet.
encoded Audio CD discs correctly, connect the
• When unplugging the player from the wall outlet,
player to an amplifier with a built-in DTS decoder.
always pull the plug, not the power cord.
Otherwise, playback sound will be distorted.
• Do not handle the power cord with wet hands!
• Disconnect the power cord before cleaning the Unplayable discs
player or moving the player. If you try to play back discs listed below, noise may be
• Do not alter, twist or pull the power cord, or put generated and causes damage to speakers.
anything heavy on it, which may cause fire, electric • DVD-RW written in the VR format
shock, or other accidents. • DVD-ROM, DVD-RAM, DVD AUDIO, CD-ROM,
• If the cord is damaged, consult a dealer and have the PHOTO CD, SACD
power cord replaced with a new one. • Unfinalized discs
Avoid moisture, water, dust, and high temperatures • Discs of irregular shape or discs with tape, seals or
• Do not place the player in moist or dusty places. paste on either the label side or playback side.
• If water gets inside the player, turn off the power and
Playing back these discs may damage the player.
remove the plug from the wall outlet, then consult
The Non-DVD side of a "DualDisc" does not comply with
your dealer. Using the player in this state may cause
the "Compact Disc Digital Audio" standard.
a fire or electrical shock.
Therefore, the use of Non-DVD side of a DualDisc on
• Do not expose the player to direct sunlight or place it
near a heating device. this product may not be recommended.
Notes on installation
• Select a place which is level, dry and neither too hot
nor too cold between 5˚C and 35˚C.
• Leave sufficient distance between the player and the TV.
• Do not install the player in a place subject to vibrations.
• Do not put heavy objects on the player.
2
Basic Operations
Insert a disc
Press 0 to open the disc tray.
1
2
Place a disc in the disc tray.
Turning on and off the player
• To insert an 8-cm disc, place it in the inner
recess.
Press 0 to close the disc tray.
3
With the label side up
Point toward the remote sensor directly as
possible (the operating range is approx. 5 m.)
About On-screen guide icons
: Playback.
: Pause.
Main display / : Slow-motion playback with the current
• Each indicator lights up when corresponding speed.
function/mode is activated, or corresponding
/ : Fast forward/backward playback with
information is on the main display.
the current speed.
: At the beginning of a scene containing
multi-angle views.
: At the beginning of a scene containing
multi-audio sounds.
: At the beginning of a scene containing
multi-subtitles.
You can change the setting so that the on-screen
guide icons do not appear on the TV screen. (See
"ON SCREEN GUIDE" in "Initial settings.")
6
Connections
Before making connections:
• Do not connect the AC power cord until all other connections have been made.
• Connect VIDEO OUT of the player directly to the video input of your TV. Connecting VIDEO OUT of the
player to a TV via a VCR/an integrated TV/Video system may cause a monitor problem.
Connecting to a TV with SCART connector
NOTE
TV
The VIDEO jack, AV OUT terminal, and
SCART cable
component (Y,P , P
(not supplied) B
IN used at the same time.
IN
S- VI
DE O
V ID
E O
L EF T
A U D IO
IG HT R
AV OU
T
The player
Connecting to a TV with composite jacks
TV
NOTES
• If your TV has a monaural audio input
IN instead of stereo, use an optional audio
cable which converts stereo audio
V ID
E O
output to monaural.
• The VIDEO jack, AV OUT terminal, and
LE FT
component (Y,P , P
A U D B
IO
RI GH used at the same time.
T
CO AX
IAL
P
PC M Y R
/S TR
Yellow EA M
DI GI RIG
TA L HT
OU T
VID EO
Audio/video cable P LE FT
VI DE B
O OU
T
(not supplied)
AU DI The player
O OU
T
White
Red
3
Turning on and off the player Changing the display window
Open/close the disc tray
Each time you press DISPLAY,
STANDBY/ON
OPEN/
the display window contents
CLOSE
changes.
Basic playback
+
– SLOW DISPLAY ON SCREEN
Buttons To do Locating the beginning of a scene
3*
Start/resume normal Playback
7
Stop You can select a title/chapter/
ENTER
• When RESUME is ON or DISC track directly and start playback.
RESUME, this player For DVD Video:
(While stopped) select title.
memorizes the position on the
PREVIOUS SELECT NEXT
(While playing back) select
disc where you interrupted
chapter.
playback. CLEAR
– To resume playback, press 3. For SVCD/VCD/CD:
Select track.
– To stop playback completely,
1 2 3
press 7 again.
To select 5: press 5.
4 5 6
8*
Pause To select 23: press 2, then 3.
• Each time you press the button, 7 8 9 To select 40: press 4, then 0.
the still picture advances to the CANCEL RETURN • If you press TITLE/GROUP
0
before entering the number, you
next frame.
TITLE/ SOUND can select the title instead of the
¡/1 Fast forward/backward GROUP EFFECT VFP DIMMER
I/P chapter.
(While paused)
ANGLE SUBTITLE AUDIO ZOOM
Slow-motion playback
Using the disc menu
• Each time you press the button, SLIDE EFFECT
the playback speed changes.
You can operate a disc—SVCD/
¢/4 Skip chapter/track VCD with Playback Control*
(PBC)—using the disc menu
• If you press and hold the button
shown on the TV screen.
during playback, playback is
* A method of controlling disc play
advanced/reversed at 5 times
for SVCD/VCD by using the disc
normal speed.
menu.
VARIABLE (For DVD Video)
7 For DVD
PLAYBACK The disc is played back at about
1.2 or 1.5 times (FAST)/0.8 or 0.6 1
Press TOP MENU or MENU to show the disc menu.
times (SLOW) normal speed. Press 5/∞/2/3 to select a desired item, then press
2
ENTER or 3 (SELECT).
The sound is not muted, and the
• With some discs, you can also select items by entering the
subtitle does not go off (except for
number using the numeric buttons.
DTS).
7 For SVCD/VCD
(For SVCD/VCD)
1 While stopped, press TOP MENU or 3 (SELECT) to
The disc is played back at about
2 times (FAST)/0.5 times (SLOW) show the menu.
normal speed. 2 Press the numeric buttons to select a desired item.
To select 5: press 5.
(Only for DVD Video)
To select 23: press 2, then 3.
The playback position moves
To select 40: press 4, then 0.
back 10 seconds before the
• To move to the next or previous page of the current menu,
current position (only within the
press ¢ or 4.
same title).
• To return to the previous menu, press RETURN.
* 38 on the player starts/pauses playback.
To play back without PBC
While stopped, press the numeric buttons instead of 3
Changing the display brightness (SELECT) to start playback.
To reactivate PBC
Press DIMMER to change the brightness of
• Press TOP MENU or MENU.
the display window.
• Press 7 to stop playback, then 3 (SELECT).
7
Connecting to a TV with component jacks Connecting to a stereo audio amplifier (receiver)
P
Y
P
B
RIGHT
XIAL Y
VIDEO
LEFT
TREAM VIDEO OUT
VIDEO P R
L OUT VIDEO OUT AUDIO OUT To analog
audio input
Connecting to a digital audio device
) jacks cannot be
R
To enjoy high-quality surround sound, connect the
DIGITAL OUT (COAXIAL) jack to a Dolby Digital or DTS
To component
decoder or an amplifier with a built-in decoder.
video input
To switch the scanning mode between Progressive and
Interlace, press and hold VFP-I/P on the remote control
for a few seconds.
NOTES
• Connect to a TV with composite jacks and set
[CONNECTIONS] to [VIDEO COMPONENT] before
connecting with component jacks. (See
"CONNECTIONS" in "Initial settings.")
• Connect "Y" to "Y,""P " to "P (C ),""P " to "P (C )"
B B B R R R
correctly.
NOTES
• The VIDEO jack, AV OUT terminal, and component
• Depending on the disc, no signal may be outputted
(Y,P , P ) jacks cannot be used at the same time.
B R
from the DIGITAL OUT. Make an analog connection
About the scanning mode indicator
in this case.
[PICTURE SOURCE] of Source type of DVD VIDEO • Set [DIGITAL AUDIO OUTPUT] in the [AUDIO]
the PICTURE menu Film source Video source preference display correctly according to the
AUTO [DDP] [P] connected digital audio equipment. (See "DIGITAL
FILM [DDP] [DDP] AUDIO OUTPUT" in "Initial settings.")
VIDEO(NORMAL)/
[P] [P]
(ACTIVE)
NOTE
Some progressive TV and High-Definition TV sets are
not fully compatible with the player. To check the
) jacks cannot be
R
compatibility of your TV, contact your local JVC
customer service center.
4
Advanced Operations
Changing the language, sound
contents and scene angle
STANDBY/ON
OPEN/
1 Press the button.
CLOSE
2
Press the button repeatedly or
5/∞ to select the desired item. +
– SLOW DISPLAY ON SCREEN
3
Press ENTER to finish the
setting.
or song
Buttons To do
ENTER
AUDIO For DVD Video:
select audio languages.
For SVCD/VCD:
PREVIOUS SELECT NEXT
select the audio
channel. CLEAR
SUBTITLE select the subtitle.
1 2 3
ANGLE select the view-angle.
4 5 6
7 8 9
CANCEL RETURN
Changing the Sound Field
0
Each time you press SOUND
TITLE/ SOUND
GROUP EFFECT VFP DIMMER
EFFECT, the Sound Effect mode
I/P
changes.
ANGLE SUBTITLE AUDIO ZOOM
• As the value becomes bigger, the
SLIDE EFFECT
Sound Effect works stronger.
Zooming the picture
To adjust the picture tone
Each time you press ZOOM, the
magnification changes. 1 Select "USER1" or "USER2."
• You can use 5/∞/2/3 button to Press 5/∞ to select a parameter, then press ENTER.
2
move the zoomed position.
GAMMA Adjust this if the neutral color is bright or dark.
To return to the normal playback,
The brightness of dark and bright portion is
select the normal size by pressing
maintained (LOW/MID/HIGH).
ZOOM repeatedly.
BRIGHTNESS Adjust this if the picture is bright or dark on the
whole (–16 (darkest) to +16 (brightest)).
CONTRAST Adjust this if the far and near position is unnatural
(–12 to +12).
SATURATION Adjust this if the picture is whitish or blackish
(–16 (blackest) to +16 (whitest)).
TINT Adjust this if the appearance of flesh tone is
unnatural (–16 to +16).
SHARPNESS Adjust this if the picture is indistinct (LOW/HIGH).
Y DELAY Adjust this if the picture looks separately/
overlapped (–2 to +2).
3 Press 5/∞ to adjust the parameter, then press ENTER.
4 Repeat step 2 and 3 to adjust other parameters.
5
Press VFP-I/P to finish the setting.
8
B
RIGHT
LEFT
P R
AUDIO OUT
To analog audio input
P
B
Y RIGHT
COAXIAL
LEFT
PCM/STREAM
VIDEO P R
DIGITAL OUT VIDEO OUT AUDIO OUT
To analog
audio input
To digital audio input
Changing the picture tone (VFP)
The VFP (Video Fine Processor)
function allows you to adjust the
picture character according to the
type of programming, picture tone or
personal preferences.
1 Press VFP-I/P.
Press 2/3 to select the desired
2
preset.
Selected
USER 1
Preset
GAMMA MID
BRIGHTNESS + 4
CONTRAST +10
SATURATION +10
+10
TINT
SHARPNESS LOW
Y DELAY + 2
Parameter
NORMAL For watching TV in a
general room.
CINEMA For watching a movie
software in a room with
suppressed light.
USER1 You can adjust
USER2 parameters that affect the
picture character and
store the settings as a user
preset. See below.