JVC AV 27320 User Manual page 16

Connections
Cable and VCR Connections - Continued
Diagram #3
INPUT 1
S-VIDEO
OVER
VIDEO
AUDIO OUT
L/MONO
L
R
R
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way
splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the cable box RF
Input.
3) Connect an RF cable from the Cable Box Output, in to the VCR RF Input.
4) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the
back of the TV.
5) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video input.
6) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left Audio
Input jack.
7) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right Audio
Input jack.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV's
Left Audio Input.
• Please consult your VCR's owner's manual for more information on its operation.
16
WALL
CABLE or ANTENNA
OUT
INPUT 2
COMPONENT
VIDEO
75Ω
VIDEO/Y
(VHF/UHF)
AUDIO
L/MONO
P
B
P
R
R
TWO-WAY
IN
SPLITTER
OUT OUT
OUT IN
CABLE BOX
VCR
V L R
IN
OUT
OR
Illustration of AV-27D303