JVC AV 27320 User Manual page 15

Cable and VCR Connections - Continued
Diagram #2
INPUT 1
S-VIDEO
OVER
VIDEO
AUDIO OUT
AUDIO
L/MONO
L
R
R
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable
box.
2) Connect an RF cable from the RF Output of the cable box, in to the RF Input on the back of
the VCR.
3) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the
TV.
4) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video
input.
5) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left
Audio Input Jack.
6) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
Audio Input jack.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV's
Left Audio Input.
• Please consult your VCR's owner's manual for more information on its operation.
WALL
CABLE or ANTENNA
OUT
INPUT 2
COMPONENT
VIDEO
75Ω
VIDEO/Y
(VHF/UHF)
L/MONO
P
B
P
R R
Connections
OUT IN
CABLE BOX
V L R
IN
OUT
OR
VCR
Illustration of AV-27D303
15