Table of Contents
Advertisement
Error
Description
207
The antenna's elevation motor has a power failure.
Contact KVH.
208
The antenna's elevation motor or limit switch failed.
Contact KVH.
222
The antenna's internal temperature exceeds acceptable
limits. Turn off the system and allow it to cool.
223
The antenna's main board has lost gyro calibration data. A
technician should calibrate the antenna's gyros.
226
The antenna has lost RF communications. Contact KVH.
227
The antenna's RF software might be corrupted. Contact
KVH.
228
The antenna has lost RF communications. Contact KVH.
229
The antenna's RF software might be corrupted. Contact
KVH.
231
The antenna's RF software might be corrupted. Contact
KVH.
232
The antenna's RF software might be corrupted. Contact
KVH.
241
The antenna's main board detects a power failure. Contact
KVH.
269
The main antenna processor detects that LNB voltage is
out of range. Contact KVH.
270
The azimuth or elevation gyro needs to be replaced.
Contact KVH.
272
The antenna's main software does not match the antenna
type. Contact KVH.
273
The antenna's motor software does not match the antenna
type. Contact KVH.
275
The azimuth or elevation gyro needs to be replaced.
Contact KVH.
276
The antenna's main board has lost accelerometer
calibration data. A technician should calibrate the
antenna's accelerometer.
TracVision RV1 User's Guide
Troubleshooting
87
Advertisement
Table of Contents
