Disc Operations - JVC KW-AVX716 Instructions Manual

Dvd receiver with monitor
Table of Contents

Advertisement

Disc operations

The disc type is automatically detected, and playback starts automatically (for some discs: automatic start depends
on its internal program).
If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
If " " appears on the screen, the unit cannot accept the operation you have tried to do.
• In some cases, without showing " ," operations will not be accepted.
~
Open the monitor panel.
<Open/Tilt> menu is displayed.
• By pressing and holding the button, you can
open the monitor panel and eject the disc.
Ÿ
Press [OPEN].
Caution on volume setting:
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
!
Insert a disc.
Label side
Monitor panel closes automatically.
If not, press [CLOSE].
Caution:
Do not place your finger behind the monitor panel.
When playing back a multi-channel encoded disc,
the multi-channel signals are downmixed.
• You can fully enjoy multi-channel sound by
connecting an amplifier or a decoder compatible
with these multi-channel sources. (☞ also page
57)
13
OPERATIONS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lvt1778-001aKw-adv790Kw-avx710

Table of Contents