Troubleshooting - JVC KW-AVX716 Instructions Manual

Dvd receiver with monitor
Table of Contents

Advertisement

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
• For operations with the external components, refer also to the instructions supplied with the adapters used for the
connections (as well as the instructions supplied with the external components).
Symptoms
• No sound comes out of the speakers.
• The screen is not clear and legible.
• "Position Error Push Open Key" appears on
the screen.
• "Mecha Error Push Reset" appears on the
screen, and the panel does not move.
• "No Signal" appears.
• The buttons on the monitor panel do not
work.
• The unit does not work at all.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
Remedies/Causes
• Adjust the volume to the optimum level.
• Check the cords and connections.
• DTS sound cannot be reproduced through the analog
terminals (Speaker out/REAR OUT).
Sunshine from the windscreen may cause this symptom.
Adjust <Bright>. (☞ page 51)
The monitor panel angle has been forcibly adjusted, or its
adjustment has been interrupted while opening or closing.
Press OPEN/TILT.
Reset the unit. (☞ page 3)
• Change the source.
• Start the playback on the external component connected
to VIDEO IN terminal.
• Check the cords and connections.
• Signal input is too weak.
When the monitor panel is open, only +/– (volume) and
OPEN/TILT work. The other buttons do not function.
Reset the unit. (☞ page 3)
Store stations manually. (☞ page 11)
Connect the aerial firmly.
68

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lvt1778-001aKw-adv790Kw-avx710

Table of Contents