EN G LI S H CROSS-CUT MITRE SAW DWS778 Congratulations! Fuses Europe 230 V tools 10 Amperes, mains You have chosen a D WALT tool. Years of experience, thorough U.K. & Ireland 230 V tools 13 Amperes, in plugs product development and innovation make D WALT one of the most reliable partners for professional power tool users.
ENGLISH Read all these instructions before attempting to operate this product 16. Remove adjusting keys and wrenches. and save these instructions. Form the habit of checking to see that adjusting keys and SAVE ALL WARNINGS AND INSTRUCTIONS wrenches are removed from the tool before operating the tool. FOR FUTURE REFERENCE 17.
EN G LI S H • Do not use any abrasive or diamond discs. Residual Risks • Use only saw blades where the marked speed is at least equal to The following risks are inherent to the use of saws: the speed marked on the saw.
Sliding fence lock lever (fig. 11) The following cords are mandatory: j. Fixed table DWS778: H05RN-F, 2x1.0 mm² k. Kerf plate DWS778 LX: H05RR-F, 2x1.5 mm² l. Mitre arm Mains Plug Replacement m. Mitre latch (U.K. & Ireland Only) n.
EN G LI S H IMPORTANT: The saw head (y) must be in its highest position to install 2. Place your thumb on the mitre arm (l) and squeeze the mitre latch a new blade. (m) to release the rotating table/mitre arm (n). 1.
ENGLISH OPERATION 2. Squeeze the mitre latch (m) then move the arm to the 0° position. 3. Release the mitre latch. Instructions for Use 4. Always ensure that the mitre latch is locked tightly before cutting. WARNING: Always observe the safety instructions and 5.
ENG LI SH Cutting Non-Ferrous Metals When cutting non-ferrous metals, the machine is only to be used to SQUARE BOX perform vertical straight and mitre cross-cuts in the mitre saw mode. We recommend that bevel and compound mitre cuts should not be performed in non-ferrous metals.
E NG L I S H Protecting the Environment WARNING: If the saw blade is worn, replace it with a new sharp blade. Separate collection. This product must not be disposed of with normal household waste. Lubrication Should you find one day that your D WALT product needs replacement, or if it is of no further use to you, do not dispose of it with household Your power tool requires no additional lubrication.
Page 16
ENG LI SH GUARANTEE WALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user.
Page 20
06126-21-1 Richard Klinger Str. 11 Fax: 06126-21-2770 65510 Idstein www.dewalt.de Ελλάς Black & Decker (Ελλάς) Α.Ε. Τηλ: 30 210 8981-616 www.dewalt.gr Στράβωνος 7 & Βουλιαγμένης 159 Service: 30 210 8981-616 Γλυφάδα 16674, Αθήνα Φαξ: 30 210 8983-570 España WALT Tel: 934 797 400 Parque de Negocios “Mas Blau”...