Pairing With Other Additional Phones; Clearing The Memory; Pairing Priority; Communicating - Fiat Panda Manual

IMPORTANT When the use of the hands-
free kit with Bluetooth
nology is not desired, message "Accoppi-
are l'apparecchio" (pair kit) can be pre-
vented from being repeated by setting car
radio channel PHONE minimum volume
(see Sound System chapter). Turn the
sound system on to hear message "Ac-
coppiare l'apparecchio" (pair kit).
During the pairing procedure the
message asking for the passcode will
be displayed; enter "1234" as pass-
code and then confirm it.
Once this done, connection between your
phone and your hands-free kit will take
place automatically as soon as the two de-
vices are less than a few meters apart. A
"beep" will be heard, indicating that con-
nection is established. Here follows an ex-
ample of first pairing procedure for the
most common mobile phones.
IMPORTANT The system operates only
when the ignition key is turned to MAR.
Pairing procedure shall be performed on-
ly the first time you pair your phone and
your hands-free kit. Should instruction
"Accoppiare l'apparecchio" (pair kit) not
be heard at first pairing, reset the system
by pressing simultaneously buttons
for 2 seconds at least.
Ô
6
PAIRING WITH OTHER
®
wireless tech-
ADDITIONAL PHONES
If you decide to pair another phone, you
just have to follow the ordinary pairing
procedure described in the previous para-
graph, in this way you can connect up to
3 mobile phones. To pair other phones
you shall reset the system (any phone
number stored will be cleared).

CLEARING THE MEMORY

Press the green
multaneously for at least 2 seconds for
clearing the system memory.
IMPORTANT Clearing the memory will
disconnect all stored phones, will clear any
phone number stored in the system mem-
ory and will require to repeat the pairing
phase.
£ and

PAIRING PRIORITY

If 2 mobile phones at least are paired, the
first phone paired (in chronological order)
will have highest priority. This means that
when getting into the car with system ac-
tive (key at MAR), this will be the first
phone to be searched and, if present, to
be connected. Should the priority phone
not be found, the system will then search
for the other phones.

COMMUNICATING

£ and red buttons si-
Ô
Find below a description of the main
communication procedures valid for
almost all mobile phones.
Making a call manually:
❒ dial the number on the mobile phone
❒ press directly the phone button to start
❒ the call will be switched automatically
keypad;
the call;
to hands-free mode (on certain phone
models, e.g. SIEMENS S55, button
must be pressed to shift the telephone
call to hands-free mode).
£