● Safety Instructions * It is very important to read and understand this manual completely before use. Keep this manual for future refer - ence. * When connecting/disconnecting cables and/or changing the phantom power setting or input level settings, turn the input level control knobs to zero or power switch off.
Page 3
● Side Panels ○ CHANNEL 1 & 2 XLR INPUTS: Connect the 3-pin XLR output of a microphone, wireless receiver or line level audio compo- nent to CH 1 and/or CH 2. Push the XLR connector into the input jack until it locks. To remove the XLR connector, press the “PUSH”...
(at Azden’s sole discretion), within two years from the date of purchase. The cost to ship a failed product to and from Azden or to its dealer shall not be covered by this warranty. A dated receipt acts to establish the date of purchase and is all that is required for warranty service.