Playback (Gr-Df470/450 Only); Normal Playback Of Images; Auto Playback Of Images; Playback Of Video Clips - JVC GR-DF450 Instructions Manual

Normal Playback Of Images

Images shot with the camcorder are
automatically numbered, then stored in
numerical order in the memory card. You can
view the stored images, one at a time, much like
flipping through a photo album.
SEL
MENU
VIDEO/ <
MEMORY
1
Load a memory card. (
2
Set the VIDEO/MEMORY Switch to
"MEMORY".
3
Set the Power Switch to "PLAY" while
pressing down the Lock Button located on the
switch.
The type of file (IMAGE or E-MAIL CLIP) which
has been played back at the last time is displayed.
4
If the video clip playback (E-MAIL CLIP, see
the right column) screen appears, press SEL.
The MEMORY SELECT screen appears.
5
Press or to select "IMAGE", and press
SET. The image playback screen (IMAGE)
appears.
6
Press < to display the previous file. Press > to
display the next file.
NOTE:
Images shot and stored on the card with another
device with resolutions other than "640 x 480" and
"1024 x 768" will be displayed as thumbnails only.
These thumbnail images cannot be transferred to a
PC.
Playback Zoom
Available only with the remote control.
( pg. 25)
Power Switch
Lock Button
> SET
pg. 18)
D.S.C. PLAYBACK (GR-DF470/450 only)

Auto Playback Of Images

You can run through all the images stored in
memory card automatically.
1
Perform steps 1 – 3 in "Normal Playback Of
Images".
2
Press 4/9 to start Auto Playback.
If you press < during Auto Playback, files are
displayed in descending order.
If you press > during Auto Playback, files are
displayed in ascending order.
3
To end Auto Playback, press 8.

Playback Of Video Clips

You can view video clips (
memory card.
1
Perform steps 1 – 3 in "Normal Playback Of
Images".
2
If the image playback (IMAGE) screen
appears, press SEL. The MEMORY SELECT
screen appears.
3
Press or
"E-MAIL CLIP", and press
SET. The video clip
playback screen (E-MAIL
CLIP) appears.
4
Press < to select the
previous file. Press > to
select the next file.
5
To start playback, press 4/9.
6
To stop playback, press 8.
NOTES:
The video clip files stored with this camcorder are
compatible with MPEG4. Some MPEG4 files
stored with other devices cannot be played back
with this camcorder.
You can also view video clips on your PC by using
®
Windows Media Player version 6.4 or later. Refer
to the instructions of PC and software.
pg. 31) stored in the
to select
E-MA I L C L IP
29
EN