Page 1
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.
TO A RISK OF FIRE, ELECTRIC could result in minor or moderate injury. SHOCK, OR INJURY TO PERSONS NOTICE is used to address practices not related to personal injury. Page 2 For technical questions, please call 1-800-444-3353. SKU 68019...
Such maintained tools. There is a risk of gases are capable of explosion and bursting if the tool is damaged. serious injury to persons. Page 4 For technical questions, please call 1-800-444-3353. SKU 68019...
Page 5
12. Disconnect tool from air supply when: 22. Obey the manual for the air compressor used to power this tool. a. Unattended. b. Performing any maintenance or repair. SKU 68019 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
SAVE THESE but must be supplied by operator. INSTRUCTIONS. Vibration Precautions This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, Page 6 For technical questions, please call 1-800-444-3353. SKU 68019...
Tool Oil into the airline connection before manual including all text under operation. Add a few more drops after subheadings therein before set up each hour of continual use. or use of this product. SKU 68019 For technical questions, please call 1-800-444-3353. Page 7...
Page 8
Air Tool & Spray Gun Portable Setup Page 8 For technical questions, please call 1-800-444-3353. SKU 68019...
Page 9
Air Tool & Spray Gun Stationary Setup SKU 68019 For technical questions, please call 1-800-444-3353. Page 9...
Page 10
The air pressure setting must not exceed job site regulations/restrictions. The air pressure setting must not exceed 90 PSI when being used with work pieces that have a thickness of less than 1-3/4”. Page 10 For technical questions, please call 1-800-444-3353. SKU 68019...
Trigger. It must not cycle (fire). With the Trigger should only fire again if both Trigger and held, carefully lift the tool and press SKU 68019 For technical questions, please call 1-800-444-3353. Page 11...
Wipe external surfaces with clean, Nailer-Stapler. dry cloth. f. Store indoors out of children’s reach. General Operating Instructions Test the Tool, as directed in the prior section, before each use. Page 12 For technical questions, please call 1-800-444-3353. SKU 68019...
If a fastener is jammed in the Magazines, Other lubricants may damage the depress the Latch (64) and pull back mechanism and may be highly on the Moveable Magazine (55), and flammable, causing an explosion. SKU 68019 For technical questions, please call 1-800-444-3353. Page 13...
Page 14
13. If you are unable to clear the fastener jam using the method prescribed above, the tool should be taken to a qualified service technician for proper servicing. Page 14 For technical questions, please call 1-800-444-3353. SKU 68019...
4. Clean or replace valve assembly. 5. Bent/damaged safety 5. Have tool serviced by qualified service technician. components. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. SKU 68019 For technical questions, please call 1-800-444-3353. Page 15...
Page 16
Latch Rectangle Gasket Latch Spring Valve Seat Grip O-Ring O-Ring Valve Stem Air Inlet Cap O-Ring Air Inlet Plug Valve Sleeve Plug Cap Valve Spring Trigger Socket Head Screw (M4x.70x10mm) Page 16 For technical questions, please call 1-800-444-3353. SKU 68019...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 68019 For technical questions, please call 1-800-444-3353. Page 17...
Page 18
Limited 1-Year Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the date of purchase (90 days if used by a professional contractor or if used as rental equipment).