JVC GR-D33 Instructions Manual page 44

TROUBLESHOOTING
44
EN
CARD ERROR!
— (GR-D93/73 only) —
Appears when the camcorder does not recognize the
loaded memory card. Remove the memory card once
and insert it again. Repeat these procedures until no
indication appears. If the indication still appears, the
memory card is corrupted.
UNSUPPORTED FILE!
— (GR-D93/73 only) —
Appears when playing back a file that is not compatible
with DCF or a file with a size that is not compatible with
this camcorder.
CHECK CARD'S WRITE PROTECTION SWITCH
— (GR-D93/73 only) —
Appears when you attempt to shoot digital still images
when the write protection tab on the SD Memory Card is
set to the "LOCK" position.
E01, E02 or E06
UNIT IN SAFEGUARD MODE REMOVE AND
REATTACH BATTERY
The error indications (E01, E02 or E06) show what type
of malfunction has occured. When an error indication
appears, the camcorder turns off automatically. Remove
the power supply (battery, etc.) and wait a few minutes for
the indication to clear. When it does, you can resume
using the camcorder. If the indication remains, consult
your nearest JVC dealer.
E03 or E04
UNIT IN SAFEGUARD MODE EJECT AND REINSERT
TAPE
The error indications (E03 or E04) show what type of
malfunction has occured. When an error indication
appears, the camcorder turns off automatically. Eject the
cassette once and re-insert it, then check if the indication
clears. When it does, you can resume using the
camcorder. If the indication remains, consult your nearest
JVC dealer.