Wipe Or Fader Effects; Program Ae With Special Effects - JVC GR-D33 Instructions Manual

FEATURES FOR RECORDING
30
EN
SNAPSHOT Button
MMENU/VOL.
Power Switch
Lock Button
VIDEO/MEMORY (GR-D93/73 only)

Wipe Or Fader Effects

IMPORTANT:
Some Wipe/Fader Effects cannot be used with certain modes
of Program AE with special effects. (See the right column) If
an unusable Wipe/Fader Effect is selected, its indicator blinks
in blue or goes out.
These effects let you make pro-style scene transitions.
Use them to spice up the transition from one scene to the
next.
Wipe or Fader works when video recording is started or
stopped.
1
Set the VIDEO/MEMORY Switch to "VIDEO".
(GR-D93/73 only)
2
Set the Power Switch to "M" while pressing down the
Lock Button located on the switch.
3
Open the LCD monitor fully. (
4
Set "v" to the desired mode. (
The WIPE/FADER menu disappears and the effect is
reserved.
The selected effect indicator appears.
5
Press the Recording Start/Stop Button to activate the
Fade-in/out or Wipe-in/out.
To deactivate the selected effect
Select "OFF" in step 4. The effect indicator disappears.
NOTE:
You can extend the length of a Wipe or Fader by pressing and
holding the Recording Start/Stop Button.
WIPE/FADER
OFF: Disables the function. (Factory-preset)
FADER–WHITE: Fade in or out with a white
screen.
FADER–BLACK: Fade in or out with a black
screen.
FADER–B.W: Fade in to a color screen from a
black and white screen, or fade out from color to black
and white.
pg. 12)
pg. 25)
WIPE–CORNER: Wipe in on a black screen from
the upper right to the lower left corner, or wipe out from
lower left to upper right, leaving a black screen.
WIPE–WINDOW: The scene starts in the center of
a black screen and wipes in toward the corners, or
comes in from the corners, gradually wiping out to the
center.
WIPE–SLIDE: Wipe in from right to left, or wipe out
from left to right.
WIPE–DOOR: Wipe in as the two halves of a black
screen open to the left and right, revealing the scene, or
wipe out and the black screen reappears from left and
right to cover the scene.
WIPE–SCROLL: The scene wipes in from the
bottom to the top of a black screen, or wipes out from top
to bottom, leaving a black screen.
WIPE–SHUTTER: Wipe in from the center of a
black screen toward the top and bottom, or wipe out from
the top and bottom toward the center leaving a black
screen.

Program AE With Special Effects

IMPORTANT:
Some modes of Program AE with special effects cannot be
used with certain Wipe/Fader effects. (See the left column) If
an unusable mode is selected, the indicator of Program AE
with Special Effects blinks or goes out.
1
Set the Power Switch to "M" while pressing down the
Lock Button located on the switch.
2
Open the LCD monitor fully. (
3
Set "r" to the desired mode. (
The PROGRAM AE menu disappears and the selected
effect is activated.
The selected effect indicator appears.
To deactivate the selected effect
Select "OFF" in step 3. The effect indicator disappears.
NOTES:
Program AE with special effects can be changed during
recording or during Record-Standby.
Some modes of Program AE with special effects cannot be
used during Night-Alive.
PROGRAM AE
OFF: Disables the function. (Factory-preset)
SHUTTER 1/60: The shutter speed is fixed at 1/
60th of a second. Black bands that usually appear when
shooting a TV screen become narrower.
SHUTTER 1/100: The shutter speed is fixed at 1/
100th of a second. The flickering that occurs when
shooting under a fluorescent light or mercury-vapor lamp
is reduced.
pg. 12)
pg. 25)