Connections To A Tv Or Vcr - JVC GR-D33 Instructions Manual

Jvc digital video camera instructions
Hide thumbs Also See for GR-D33:
Table of Contents

Advertisement

Connections To A TV Or VCR

These are some basic types of connections. When
making the connections, refer also to your VCR and TV
instruction manuals.
To AV
Audio/Video
cable
(provided)
1
2
3
VCR
A
White to AUDIO L IN*
B
Red to AUDIO R IN*
C
Yellow to VIDEO IN**
D
To S-VIDEO IN***
*
Not required for watching still images only.
** Connect when your TV/VCR has only A/V input
connectors.
*** Connect when your TV/VCR has S-VIDEO IN and A/V
input connectors. In this case, it is not necessary to
connect the yellow video cable.
To S
S-Video cable
(optional)
4
TV
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as shown in
the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3
Connect the VCR output to the TV input, referring to
your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the TV to
its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV
Date/Time
Set "DATE/TIME" to "AUTO", "ON" or "OFF". (
Or, press DISPLAY on the remote control (provided with
GR-D93/73 only) to turn on/off the date indication.
Time Code
Set "TIME CODE" to "ON" or "OFF". (
Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/TV".
(
pg. 25, 28)
NOTES:
It is recommended to use the AC Adapter as the power
supply instead of the battery pack. (
To monitor the picture and sound from the camcorder
without inserting a tape or memory card*, set the
camcorder's Power Switch to "A" or "M", then set your TV
to the appropriate input mode.
* GR-D93/73 only
Make sure you adjust the TV sound volume to its minimum
level to avoid a sudden burst of sound when the camcorder
is turned on.
If you have a TV or speakers that are not specially shielded,
do not place the speakers adjacent to the TV as
interference will occur in the camcorder playback picture.
When a cable is connected to the AV connector, the sound
is not heard from the speaker.
VIDEO PLAYBACK
EN
pg. 25, 28)
pg. 25, 28)
pg. 7)
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents