Shoulder Strap Attachment; Tripod Mounting - JVC GR-AX841 Instructions Manual

1
4
2
3

Shoulder Strap Attachment

1
ATTACH STRAP
Following the illustration at left, thread the strap
through the top of the eyelet
thread it through the buckle
to attach the other end of the strap to the other eyelet
3
, making sure the strap is not twisted.
2
ADJUST LENGTH
Adjust as shown in the illustration at left

Tripod Mounting

1
ALIGN AND TIGHTEN
Align the screw and camera direction stud on the
tripod with the camera's mounting socket and stud
hole. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
15
EN
1 , then fold it back and
2
. Repeat the procedure
4
.