Jonsered CS 2255 Operator's Manual page 15

Jonsered chain saw operator's manual
Hide thumbs Also See for CS 2255:
Table of Contents

Advertisement

GENERAL SAFETY PRECAUTIONS
Bar
Check regularly:
Whether there are burrs on the edges of the bar. Remove
these with a file if necessary.
Whether the groove in the bar has become badly worn.
Replace the bar if necessary.
Whether the tip of the bar is uneven or badly worn. If a
hollow forms on the underside of the bar tip this is due to
running with a slack chain.
To prolong the life of the bar you should turn it over daily.
WARNING! Most chain saw accidents
!
happen when the chain touches the
operator.
Wear personal protective equipment. See
instructions under the heading Personal
protective equipment.
Do not tackle any job that you feel you are
not adequately trained for. See instructions
under the headings Personal protective
equipment, How to avoid kickback, Cutting
equipment and General working
instructions.
Avoid situations where there is a risk of
kickback. See instructions under the
heading Machine' ' ' ' s safety equipment.
Use the recommended protective equipment
and check its condition. See instructions
under the heading General working
instructions.
Check that all the chain saw safety features
are working. See instructions under the
headings General working instructions and
General safety precautions.
– 15
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs 2255 epa ii

Table of Contents