Page 2
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual FCC Statement This device complies with Class B Part 15 of the FCC Rules. The device generates, uses and can radiate radio frequency energy and, if not installed and used as instructed, may cause harmful interference to radio communication.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Introduction This is a complete DOCSIS 2.0/EuroDOCSIS2.0 compliant cable modem integrate with VoIP product. It works with all existing DOCSIS/EuroDOCSIS 2.0/1.1/1.0 compliant head- end equipment and Multiple Service Operator (MSO) networks.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Safety Precautions For your protection, observe the following safety precautions when setting up and using your equipment. Failure to observe these precautions can result in serious personal injury and damage to your equipment.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Hardware Overview Front Panel and LEDs There are nine Light-Emitting-Diodes (LEDs) located on the front panel provide status information to the users. NAME COLOR MODE STATUS Connected with power Power Green...
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Rear Panel and Hardware Connections This chapter describes the proper steps for connecting your cable modem. Please be sure to follow the steps in the sequence outlined below. Failure to do so could result in improper operation or failure of your cable modem.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Ethernet Installation The LAN port you are using is auto-negotiating 10/100Mbps (Switch) Ethernet Interface. You can use the Ethernet port to connect to the Internet with an Ethernet network device such as NIC/Hub/Switch through RJ45.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Installing the USB Driver for Windows Vista / XP / 2003 If you connect the Cable Modem to PC via USB port, then your will need to install the USB driver. Please follow the description below to install the driver for your PC. If you are connecting the Cable Modem to your PC only using the Ethernet port, please skip this section.
Page 10
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Windows shall find the location of USB driver and complete the installation. Click Finish. For more information, please refer to User’s Manual.
You may get an error message. This is normal. Continue on to the next step. Type the default IP address of the DCM-604 (e.g. 192.168.0.1) and press Enter. The Log In page appears. Type the user name (admin) and your password (password) in the respective fields.
IP address with an expiration time. To set the maximum number of PCs to which the DCM-604 will issue IP addresses, enter it in the Number of CPEs box and then click Apply. (CPE is another term sometimes...
IP and MAC addresses of each PC. Since MAC addresses are unique and permanently fixed into hardware, you can identify any PC listed by its MAC address. The DCM-604 provides leases for 3600 seconds (default), and has an automatic renewal mechanism that will keep extending a lease as long as the associated PC remains active.
LAN, but packets they originate to WAN addresses are blocked by the DCM-604. To enable IP Filtering feature of DCM-604, check the Enable box and click Apply button. 5.4.3 MAC Filtering The MAC Filtering page enables you to enter the MAC address of specific PCs on your LAN that you don’t permit to have outbound access ability to the WAN.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual To enable MAC filtering feature of DCM-604, enter the MAC address of the LAN device and click Apply button. 5.4.4 Port Filtering The Port Filtering page allows you to enter ranges of destination ports (applications) that you don’t want your LAN PCs to send packets to.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Using the Port Forwarding page, you can provide local services (web servers, FTP servers, mail servers, etc) for people on the Internet or play Internet games. A table of commonly used port numbers is also provided.
HTTP server on this machine, anyone will be able to access that HTTP server by using your DCM-604’s IP address as the destination. This may be used when problem applications do not work with port triggers. The setting of “0” indicates NO DMZ Parental Control 5.5.1 User Setup...
Page 18
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual 5.5.3 Time of Day Access Policy This page allows configuration of time access policies to block all internet traffic to and from specific network devices based on time of day setting.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Wireless 5.6.1 Radio The Wireless Connection Stage Configuration of the Wireless Radio includes current country and channel number. 5.6.2 802.11 Primary Network The 802.11 Primary Network allows configuration of the Primary Wireless Network and its security settings.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual 5.6.4 Advanced This page allows configuration of data rates and WiFi thresholds. 5.6.5 Bridging This page allows configuration of WDS features.
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual 5.6.6 WMM This page allows configuration of the Wi-Fi Multimedia QoS. 5.6.7 Guest Network This page allows configuration of a guest network..
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Section MTA has 5 sub-items, which indicate the status of MTA. These information can help you to understand the parameters of MTA operation. 5.7.1 Status This page displays initialization status of the MTA.
• Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management.
Page 24
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process.
Page 25
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual To change the MTU rate on your router follow the steps below: • Open your browser, enter the IP address of your router (192.168.0.1) and click OK. • Enter your username (admin) and password (password). Click OK to enter the web configuration page for the device.
Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it.
Page 28
Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
User’s Manual Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Page 31
DCM-604 Series EMTA Embedded Multimedia Terminal Adaptor User’s Manual Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1).