SAFETY PRECAUTIONS SELECT THE BEST LOCATION • Please read this installation manual completely before Indoor Unit WARNING installing the product. • Avoid locating the unit near a heat source. 1) Install strictly in accordance with these instructions. • If the power cord is damaged, replacement work shall be •...
INDOOR UNIT SELECT THE BEST LOCATION (continued) Name of Accessory Quantity supplied 1. FITTING THE INSTALLATION PLATE Installation Plate Clip Anchor 5-8 (depending on models) NOTE: The mounting wall should be strong and solid enough Self-tapping Screw AST3.9 x 2.5 5-8 (depending on models) to prevent it from vibrating.
3. CONNECTIVE PIPE AND DRAINAGE INSTALLATION 4. CONNECTING THE CABLE TO THE INDOOR UNIT Drainage Electrical Work Connecting the cable to the indoor unit 1. Run the drain hose sloping downward. Do not install the Electric safety regulations for the initial installation: NOTE: Before performing any electrical work, turn off the drain hose as illustrated in the diagrams (see right).
OUTDOOR UNIT 3. REFRIGERANT PIPE CONNECTION Flaring 1. OUTDOOR INSTALLATION PRECAUTIONS Ob l i q ue Roughnes s Burr 1. Cut a pipe with a pipe cutter. 2. Remove fl are nuts attached to indoor and outdoor unit, then put them on pipe/tube having completed burr •...
5. After the evacuation is complete, fully close the handle Lo of the manifold valve and stop the operation of the 5. AIR PURGING AND TEST OPERATION vacuum pump. • Evacuate for 15 minutes or until the compound meter indicates -76cmHg (-1.0 x 10 Pa).