Table of Contents
Related Manuals for Ryobi HydroSurge RPW150HS
Summary of Contents for Ryobi HydroSurge RPW150HS
- Page 1 RPW150HS HydroSurge™ Electric Pressure Washer OperaTOr's manual (Original Instructions) WARNING! To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for your purchase.
-
Page 2: Important Safety Instructions
ENGLISH(Original Instructions) INTENDED USE WARNING: The cleaner is intended only for the cleaning of High pressure jets can be dangerous if subject to vehicles, boats, buildings, etc, by the removal misuse. The jet must not be directed at persons, of stubborn dirt using clean water and chemical animals, electrical devices, or the machine itself. detergents. . For domestic use only, not for professional use, and WARNING: only for operation at temperatures above 0° C . When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. - Page 3 ENGLISH(Original Instructions) WARNING: Before storing, allow the motor to cool. To reduce the risk of electrocution, keep all When servicing use only identical replacement parts. connections dry and off the ground. Do not touch use of any other parts may create a hazard or cause plug with wet hands. product damage. ONLY use cold water. To reduce the risk of injury, High pressure cleaners make sure minimum clearance of 1 metre is shall not be used by children or untrained personnel. maintained from combustible materials. keep children and visitors away. all visitors should Connect pressure washer only to an individual wear safety glasses and be kept a safe distance from...
- Page 4 ENGLISH(Original Instructions) SYMBOLS some of the following symbols may be used on this product. please study them and learn their meaning. proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION safety alert Indicates a potential personal injury hazard. Volts Voltage amperes Current Hertz Frequency (cycles per second) Watt power minutes Time ~ alternating Current Type of current no load speed rotational speed, at no load .../min per minute revolutions, strokes, surface speed, orbits etc., per minute Wet Conditions alert Do not expose to rain or use in damp locations. read The Operator’s To reduce the risk of injury, user must read and understand manual operator’s manual before using this product.
- Page 5 If you do not under s tand the warnings motor and instructions in the operator’s manual, section section do not use this product. Call ryobi customer 230-240v 3 x 1.5mm² 3 x 2.5mm² service for assistance. WARNING: WARNING: Keep the extension cord clear of the working The operation of any power tool can result in area. position the cord so that it will not get...
-
Page 6: Product Specifications
ENGLISH(Original Instructions) PRODUCT SPECIFICATIONS PRODUCT SPECIFICATIONS High pressure rated pressure (p) ..............................14 mpa allowable pressure (pmax) ........................... 16 mpa rated Water Flow (Q) .............................7 l/min low pressure (High Flow) maximum Water Inlet pressure (pin max) ....................up to 0.7 mpa maximum Water Flow ..........................up to 9.5 l/min Input..........................230-240 V, 50 Hz, aC only, 2800W protection Degree (IeC 60529) ..........................Ip25 sound pressure level ........................76.6 dB(a); K=3dB(a) sound power level ......................... 90.2 dB(a); K=3dB(a) 2 ; Vibration ............................0.981 m/s K=1.5 m/s DESCRIPTION Figure 7 2. nozzle storage 4. Detergent tank Figure 2 22. Water intake coupler... - Page 7 ASSEMBLING THE GUN/LANCE If in doubt, call ryobi Customer service for assistance. See Figure 5. Operation of a product that may have been improperly ■ push the two ends of the gun/lance together so that preassembled could result in serious personal injury.
-
Page 8: Operation
ENGLISH(Original Instructions) ■ lower the locking collar and rotate counter clockwise with the requirement to avoid back siphonage according to en 60335-2-79/a2: 2007. to tighten securely. ATTACHING THE HIGH PRESSURE AND LOW To connect the garden hose to the pressure washer: PRESSURE HOSES TO THE GUN ■ uncoil the garden hose. See Figure 6. NOTE: There must be a minimum of 3 metres of ■ The low pressure hose is the clear tube with the unrestricted garden hose between the pressure washer plastic fitting and goes on the spout at the bottom of... - Page 9 ENGLISH(Original Instructions) trigger and will automatically shut the unit off. at your face or at others. The Quick Connect USING THE GUN/LANCE collar contains small springs that could eject See Figures 10 - 11. the nozzle with some force. Failure to heed this For the most effective cleaning, the spray nozzle should may cause personal injury. be between 20cm and 60cm from the surface to be using the Quick Connect collar, changing nozzles is cleaned. If the spray is too close it can damage the easy.
-
Page 10: Maintenance
■ To draw water from a water tank, bucket, pond, etc. you must first get a suction hose kit, which is NOZZLE MAINTENANCE made up of a compatible hose and water filter. ryobi excessive pump pressure (a pulsing sensation felt while recommends the expand-it™ suction Hose Kit. squeezing the trigger) may be the result of a clogged or ■ Connect the suction hose to the water inlet on the dirty nozzle. -
Page 11: Troubleshooting
ENGLISH(Original Instructions) TROUBLESHOOTING Problem Possible Cause Solution Connect the power cord to a live 220-240V aC, 50 Hz aC plug. power cord not connected to pressure washer power source Turn switch on. does not start when trigger is switch is off reset house breaker. make sure pressure washer is depressed connected to an individual branch circuit only. If using an House circuit breaker is tripped extension cord, make sure it is heavy enough to carry the current of the pressure washer. Inadequate water supply provide adequate water flow. spray lance leaks Check connections and / or replace lance.