Download Print this page
Honeywell M5-C01 Series Instruction Sheet

Honeywell M5-C01 Series Instruction Sheet

Gasalertmicro 5/pid/ir battery charger

Advertisement

Quick Links

BW TECHNOLOGIES
BY HONEYWELL
GasAlertMicro 5/PID/IR Battery Charger
Instruction Sheet
Introduction
The GasAlertMicro 5/PID/IR Battery Charger ("the charger") charges the
GasAlertMicro 5, GasAlertMicro 5 PID, and the GasAlertMicro 5 IR
rechargeable battery packs.
Standard GasAlertMicro 5/PID/IR Battery Charger kit includes:
GasAlertMicro 5/PID/IR Battery Charger unit
Universal power adapter
Power cord
Wall mounting bracket
Instruction sheet
Table 1. Order Number
Model No.
Description
M5-C01
Cradle charger
*
Add suffix (-UK) for United Kingdom mains plug, (-EU) for European mains
*
plug, (-AU) for Australian mains plug.
D5688/2
iERP: 124011
© BW Technologies 2006, all rights reserved. Printed in Canada.
All product names are trademarks of their respective companies.
a Safety Information - Read First
For indoor use only.
Warning: Substitution of components may impair Intrinsic Safety of the
detector being charged.
Do not charge the battery pack with any other unapproved charger. Do not
use the charger, change the batteries, or charge the batteries in a
hazardous location. Failure to observe these precautions will impair the
Intrinsic Safety of the detector and can lead to fire and/or explosion.
Do not expose the charger to electrical shock or severe continuous
mechanical shock.
Ensure the battery pack is locked in place prior to operating the detector.
If the charger is damaged or parts are missing, contact
BW Technologies by Honeywell
To eliminate the risk of electrical shock, unplug the charger whenever
cleaning or other maintenance is required.
Avoid touching the charging cradle contact pins.
Use only BW approved batteries. Do not use alkaline or other non-
rechargeable batteries with this charger.
The detector must be deactivated before charging.
Do not calibrate the detector during or immediately after charging is
complete.
Table 2. International Symbols
Qty
Symbol
1
Approved to both U.S. and Canadian Standards by the CSA
n
International
a
Caution – risk of danger
dc current
immediately.
Meaning
Parts of the GasAlertMicro 5/PID/IR Battery Charger
1
Retaining hooks
2
Charging cradle
3
Battery connectors (contact pins)
4
Charger status LED
5
Mounting access hole
6
Retaining base

Advertisement

loading

Summary of Contents for Honeywell M5-C01 Series

  • Page 1 GasAlertMicro 5, GasAlertMicro 5 PID, and the GasAlertMicro 5 IR ⇒ If the charger is damaged or parts are missing, contact rechargeable battery packs. BW Technologies by Honeywell immediately. ⇒ To eliminate the risk of electrical shock, unplug the charger whenever cleaning or other maintenance is required.
  • Page 2: Mounting The Charger

    Figure 2. Attaching the Charger Base Mounting the Charger Charging the battery pack in temperatures above 86°F (30°C) greatly reduces the life of the battery pack. The charger can be easily mounted onto a secure surface. To mount the charger, complete the following: The battery pack may be hot immediately after charging.
  • Page 3 Holding the detector vertically, insert it into the charging cradle. Remove/Replace the Battery Pack Charging the Battery Pack without the Detector Ensure the connector holes at the bottom of the detector align To remove/replace the battery pack, refer to Figure 5 and complete the To charge the battery pack separately, complete the following: over the black prongs on the retaining base.
  • Page 4: Troubleshooting

    When stored for extended periods of time, ensure that the battery pack is fully charged and then recharged every 30 days. The battery pack is Contact BW Technologies severely depleted. by Honeywell Replacement Parts and Accessories Damaged or defective Contact BW Technologies battery pack.
  • Page 5: Specifications

    Size: 87 x 83.97 x 80.8 mm (3.4 x 3.3 x 3.2 in.) LIMITED WARRANTY & LIMITATION OF LIABILITY BW Technologies by Honeywell (BW) warrants this product to be free from defects in material Weight: 210 g (7.4 oz.) and workmanship under normal use and service for a period of two years, beginning on the date of shipment to the buyer.
  • Page 6 Thank you for reading this data sheet. For pricing or for further information, please contact us at our UK Office, using the details below. UK Office Keison Products, P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England. Tel: +44 (0)1245 600560 Fax: +44 (0)1245 808399 Email: sales@keison.co.uk...