Jenn-Air W2780 Use And Care Manual page 20

Self-cleaning convection wall ovens w/electronic controls
Table of Contents

Advertisement

Probe
BASIC INSTRUCTIONS
1.
Insert probe.
2.
Touch Probe Pad.
3.
Turn Set Dial to desired temperature.
4.
Touch Bake Pad or Convect Bake Pad.
5.
Turn Set Dial to desiredtemperature.
6.
Touch Cook Time Pad.*
7.
Turn Set Dial to enter estimatedcookingtime.*
8.
Touch Stop Time Pad.*
9.
Turn Set Dial to enter Stop Time.*
Omit steps6-9 if you wish to start cookingimmediately.
To set probe
feature:
1.
Insert the probe into the food item. For
meats, the probe tip should be located in
the center of the thickest part of the meat
and not in fat or touching a bone.
2.
Placethe food in the oven using the rack
......
position suggested on page 11.
3.
Insertthe probe plug intothe receptacle located behind the metal cover plate on the
right inside oven wall. Be certain to insert plug into the receptacle all the way.
NOTE: After the probe is inserted, the Indicator Word PRB will flash and signal will
beep reminding you to enter the desired probe temperature.
4.
Touch Probe Pad.
Indicator Word PRB will flash and three dashes will be shown in the Display.
5.
Turn Set Dial to desired degree of doneness.
If the Set Dial is turned one click, 135° will be shown. The Set Dial can be turned in
either direction. If desired, the temperature may be set upward or downward in 5°
increments.
(Allowable range is 100° to 200°.)
EXAMPLE: At 10 o'clock to set the probe for 150°, turn Set Dial clockwise until
Display shows:
I ID.mmp
I
.LILt
'
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ww2780Wm2780

Table of Contents