Advertisement
Quick Links
®
Hotwire
6210-A2, 6211-A2, and 6381-A2
Quick Installation Instructions
Document Number 6210-A2-GZ11-00
April 2004
Installation
To install your modem:
➊
Connect the LINE port of the modem to your DSL line
using the supplied phone cord.
➋
Connect the TELEPHONE port of the modem to your
telephone using the cord that came with your telephone.
➌
Connect either:
• The LAN port of the modem to a 10/100BaseT
Ethernet network interface card on your PC, or to a
hub or switch on your network. An Ethernet cable is
supplied with your modem.
– or –
• The USB port of the modem to a free USB port on
your PC.
➍
Connect the POWER receptacle to the power supply
and plug the power supply into a wall outlet.
If you connected the USB port of the modem to your PC, the
Found New Hardware Wizard appears on your computer
screen. Insert the supplied CD in your CD drive and install
the USB drivers on it as directed by the Wizard.
See the user's guide on the CD for important safety
instructions and more information.
Copyright © 2004 Paradyne Corporation.
LINE
PHONE
USB
LAN
1
2
3
OR
RESET
DEFAULT
POWER
4
04-17510
Advertisement
Related Manuals for Paradyne Hotwire 6210-A2
Summary of Contents for Paradyne Hotwire 6210-A2
- Page 1 Insert the supplied CD in your CD drive and install the USB drivers on it as directed by the Wizard. See the user’s guide on the CD for important safety instructions and more information. Copyright © 2004 Paradyne Corporation.
- Page 2 If you have executed a separate written agreement covering the Software supplied to you under this purchase, 6. In no event will Paradyne be liable to Licensee for any such separate written agreement shall govern.