1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
1. Precautions 1-2. Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire.
46A6AFOC/46L6AFOC/46D6AFOC/ 52A6AFOC/52L6AFOC/ Local set EU/EU_ltaly//NORDIG/AD_au/CIS Model LC350/LC450/LC460/LC530/LC650 LC570 LC570 LC570 LC570 TUNER DRXKSEMCO/DRXKALPS/..S2semco S2semco S2semco S2semco SAMSUNG / Etron Light Effect On/Off SUWON/SESK/SHE/TTSEC/SDMA/ Ch Table SERK/SEIN/SAVINA/SIEL/TSE Country Front Color S-BLK/S-R-BLK/S-C-Gray/... T-R-BLK T-R-BLK T-R-BLK T-R-BLK LC450 Model Name LE26C450E1W...
Page 14
2. Product specifications 2-3. Specification Comparison to Old Models LC530 O : application, X : non-application ※ Model C530 (LE**C53***) B530 (LE**B53***) Design Display Type LCD TV LCD TV Built-in Tuner Resolution 1920 x 1080 1920 x 1080 LCD Panel TFT LCD Panel TFT LCD Panel Screen Size...
Page 15
2. Product specifications LC550 O : application, X : non-application ※ Model C550 (LE**C55***) B550 (LE**B55***) Design Display Type LCD TV LCD TV Built-in Tuner Resolution 1920 X 1080 1920X1080 LCD Panel TFT LCD Panel 60Hz TFT LCD Panel 60Hz Screen Size 32"/37"/40"/46"...
Page 16
2. Product specifications LC570 O : application, X : non-application ※ Model C570 (LE**C57***) B570 (LE**B57***) Design Display Type LCD TV LCD TV Built-in Tuner Resolution 1920 X 1080 1920X1080 LCD Panel TFT LCD Panel 60Hz TFT LCD Panel 60Hz Screen Size 32"/37"/40"/46"...
Page 17
2. Product specifications LC450 O : application, X : non-application ※ Model C450 (LE**C45***) B450 (LE**B45***) Design Display Type LCD TV LCD TV Built-in Tuner Resolution 1366X768 1366X768 LCD Panel TFT LCD Panel 60Hz TFT LCD Panel 60Hz Screen Size 26"/32"...
Page 18
2. Product specifications Frequency (DTV) Channel UK France Germany Italy Spain Sweden Finland [A] 56 [B] 64.5 [C] 84.5 [D] 177.5 [5] 178.75 [5] 177.5 [E] 186 [5] 177.5 [5] 177.5 [6] 186.75 [6] 184.5 [F] 194.5 [6] 184.5 [6] 184.5 [7] 194.75 [7] 191.5 [G] 203.5...
2. Product specifications 2-2. New Features explanation Anynet+: Anynet+ is an AV network system that enables you to control all connected Samsung AV devices ሪ with the TV’s remote. To directly connect to TV Anynet+ Device 1 Anynet+ Device 2 Anynet+ Device 3 HDMI 1.3 Cable...
3. Disassembly and Reassembly 3. Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the LE37C53*** LCD TV. WARNING: This LCD TV contains electrostatically sensitive devices. Use caution when handling these components. 3-1. Disassembly and Reassembly Cautions: 1.
Page 24
3. Disassembly and Reassembly Description Picture Description Screws 2. Remove the screws of rear-cover. ► C5XX 32" : Remove the 9 screws of rear-cover. 37" : Remove the 13 screws of rear-cover. 40" : Remove the 11 screws of rear-cover. 46"...
Page 25
3. Disassembly and Reassembly Description Picture Description Screws 7. Lift up the stand link. 8. Lift up the panel. Reassembly procedures are in the reverse order of disassembly procedures. ※ Screw Size Code No. A (mm) B (mm) C (mm) Q’ty 6001-002284 8.3±0.5...
4. Troubleshooting 4. Troubleshooting 4-1. Troubleshooting 4-1-1. Previous check Check the various cable connections first. • Check to see if there is a burnt or damaged cable. • Check to see if there is a disconnected or loose cable connection. •...
4. Troubleshooting 4-1-2. No Power The LEDs on the front panel do not work when connecting the power cord. Symptom The SMPS relay does not work when connecting the power cord. The units appears to be dead. The IP relay or the LEDs on the front panel does not work when connecting the power cord if the cables are improperly connected or the Main Board or SMPS is not functioning.
Page 29
4. Troubleshooting 4-1-3. No Video (Analog PC signal) Symptom Audio is normal but no picture is displayed on the screen. Check the PC source Major Check the Arsenal, Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 32
4. Troubleshooting 4-1-4. No video (HDMI1, 2, 3, 4 - Digital signal) Symptom Audio is normal but no picture is displayed on the screen. Check the HDMI source. Major Check the HDMI switch, Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 35
4. Troubleshooting 4-1-5. No Video (Tuner_CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Tuner CVBS source. Major Check the Tuner, Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 38
4. Troubleshooting 4-1-6. No Video (Tuner DTV) Symptom Audio is normal but no picture is displayed on the screen. Check the DTV source. Major Check the Tuner, Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 41
4. Troubleshooting 4-1-7. No Video (Video CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Video CVBS source Major Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 44
4. Troubleshooting 4-1-8. No Video (Component) Symptom Audio is normal but no picture is displayed on the screen. Check the Component source Major Check the chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
4. Troubleshooting 4-1-9. No Sound Symptom Video is normal but there is no sound.. When the speaker connectors are disconnected or damaged. Major When the sound processing part of the Main Board is not functioning. checkpoints Speaker defect.. Check the source and check the connection of sound cable? Input the sound source properly.
4. Troubleshooting 4-2. Alignments and Adjustments 4-2-1. General Alignment Instuction Usually, a color LCD-TV needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync. Use the specified test equipment or its equivalent. Correct impedance matching is essential.
4. Troubleshooting 4-3. Factory Mode Adjustments 4-3-1 Entering Factory Mode To enter ‘Service Mode’ Press the remote -control keys in this sequence : - If you do not have Factory remote - control Power OFF INFO MENU MUTE 4-3-2 How to Access Service Mode Using the Customer Remote Turn the power off and set to stand-by mode.
Model LC530 UC6540/UC6550/UC6600/UC6620/UC6630/UC6700/UC6720/ Select Model UC6730/UC6740/UC6800/UC6830/UC6900/UC6900H/ UC8000/ PC420/PC430/PC431/PC432/PC450/PC451/PC480/PC520/ PC530/PC531/PC540/PC541/PC550/PC551/PC560/PC580/ PC590/PC670/PC6100/PC6400/PC6500/PC7000/PC7700/ PC8000 EU : DRXKSEMCO DRXKSEMCO/S2Semco/T2CXD/DRXKSEM_E/ AU : TUNER DRXKSEMCO DRXKALPS/DRXKSEN_2/DRXKXG DRXKALPS satellite : S2Semco SAMSUNG / SAMSUNG SAMSUNG Etron NONE/W-MILKY/T-M-Brn/T-W-Brn/T-W-Gray/W-D- Select Design Front Color Gray/W-M-Whit/W-Violet/T-C-Gray/T-R-BLK/S-BLK/S- for Illuminance RBLK/S-C-Gray/ Sensor 4-27...
Page 53
4. Troubleshooting Control Factory Name Data Range Control EDID Sub Option Shop Option Sound Factory Name Data EDID EDID ON/OFF EDID WRITE ALL … EDID WRITE PC … EDID WRITE … HDMI EDID WRITE … Download EDID data to EEPROM. HDMI1 1.
Page 54
4. Troubleshooting Factory Name Data Range Hotel Option Hotel Mode SI Vender … Power On … Channel Channel Type … Power On Volume … Min Volume … Max Volume … Panel Button Lock … Power On Source … Factory Name Data Range Shop Option...
Page 55
4. Troubleshooting Factory Name Data Range Test Pattern Panel Auto Setting Panel Display fixed Time Logic Usb D/L Tuner Status Factory Name Data Range Test Pattern Test for Input of Scaler. OFF/ White/Grey/Black Pattern Sel If you can see pattern well, there is Red/Green/Blue problem at input of Scaler.
Page 56
4. Troubleshooting ISDB-T FFT Size_1 Not modified Guard Interval_1 Not modified Freq. Offset_1 Not modified SNR_1 Not modified IF AGC_1 Not modified TMCC Lock_1 Not modified TS Packet_1 Not modified Master Lock_1 Not modified A_Modulation_1 Not modified A_Code Rate_1 Not modified A_Timer Not modified InterLeave_1...
Page 57
4. Troubleshooting ADC/WB Factory Name Data Range ADC/WB ADC Target ADC RESULT Factory Name Data Range AV Calibration Success Success / Failure Comp Calibration Success Success / Failure PC Calibration Success Success / Failure HDMI Calibration Success Success / Failure Factory Name Data Range...
4. Troubleshooting 4-4. White Balance - Calibration 4-4-1 White Balance -Calibration 1. Calibration AV Calibration Comp Calibration PC Calibration HDMI Calibration 4-4-2 White Balance - Adjustment (low light) (hight light) Sub Bright Sub Contrast 3. W/B R offset R gain G offset G gain B offset...
4-6. Servicing Information 4-6-1 USB Download Method Samsung may offer upgrades for TV’s firmware in the future. Please contact the Samsung call center at 1-800- SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
4. Troubleshooting 4-7. How To Upgrade Sub Micom With Ddc Manager 4-7-1. TV Sub S/W Order Description Connect DDC MANAGER to the TV Set with D-SUB cable. And Power on. (USB type : MTI-2510 / parallel type : MTI-2059) Enter the factory mode. Control - EDID - EDID ON/OFF Select ON.
Page 62
4. Troubleshooting Order Description Push the ‘Program’ Button. (It takes quite a bit of time. You can wait or close the DDC tool by force and open tool and load file again.) Push the ‘Program’ Button again. (It takes about 100 seconds.) If update completes, TV set will booting automatically.
4. Troubleshooting 4-8. Mechanical diagram 32LC530 37LC530 40LC530 46LC530 Set with Stand 783.0*220.2*536.2 901.8*240.0*613.6 970.0*240.0*651.7 1102.4*260.1*733.2 (W * D * H) Size [mm] Set without Stand 783.0*76.2*497.5 901.8*76.9*561.8 970.0*78.6*600.1 1102.4*78.7*676.3 (W * d * H1) Set with Stand 10.76 14.24 17.3 20.64 Weight...
Page 64
4. Troubleshooting 26C450 32C450 Set with Stand 646.5*222.2*477.3 784.4*247.2*560.0 (W * D * H) Size [mm] Set without Stand 646.5* 77.0*432.3 784.4*76.2*514.2 (W * d * H1) Set with Stand Weight [Kg] Set without Stand 4-39...
6. Wiring Diagram 6-3. Connector Functions Connector Functions Supply main power and dimming signal from IP board to Main Board. Main CN210 IP CN802 Main CN1405_FHD T-CON CNF1 The LVDS signal transfered from Main Board to Panel . IP CN803 ...
Page 93
BZX84C18-V P_GND 100KF S-GND SOT-23 1608 1608 1608 CN801S DAC-11PM 10A/250V~ USER DATE NOTE 2010.01.22 SAMSUNG ELECTRONICS N.C : No Connection MODEL NAME SCALE DRAWN N.J.PARK SEC P/N : BN44-00338A REVISION CHECKED Y.S.NOH REV R.C PDM NUMBER LEVEL APPROVED H.G.CHOI...
Page 94
1608 UM851 KIA431AM SOT-23 RM855 RM860 2.4KF 68KF 1608 1608 S-GND USER DATE NOTE 2010.01.22 SAMSUNG ELECTRONICS N.C : No Connection MODEL NAME SCALE DRAWN N.J.PARK SEC P/N : BN44-00338A REVISION CHECKED Y.S.NOH REV R.C PDM NUMBER LEVEL APPROVED H.G.CHOI...
PRINTING THE ELECTRONIC DOCUMENT The PDF of this service manual is not designed to be printed from cover to cover. The pages vary in size, and must therefore be printed in sections based on page dimensions. NON-SCHEMATIC PAGES Data that does NOT INCLUDE schematic diagrams are formatted to 8.5 x 11 inches and can be printed on standard letter-size and/or A4-sized paper. SCHEMATIC DIAGRAMS The schematic diagram pages are provided in two ways, full size and tiled.