Serial Port Selection At Program Startup - Andrew ATC200-Lite Teletilt Installation And Operation User Manual

Remote control variable electrical downtilt system
Table of Contents

Advertisement

Section 3–Program Startup and Configuration

3.2 Serial Port Selection at Program Startup

1. The install process places an icon for the program on the desktop (Figure 3-2).
2. Double click on the icon, shown in
Figure 3-2, to start the program. If the
PC is connected to the controller on
serial port 1, and if serial port 1 has
been made available to the program
by the PC, the program will select
that port by default. A successful
connection will display the program's
main screen (Figure 3-3).
Command Status/Response window displays program activity.
3. If Serial Port 1 does not exist on the
PC, or if the PC is not allowing serial
port 1 to be accessed by the program,
the program will prompt the user to
select a different serial port (Figure
3-4).
3-2
Figure 3-3. ATC200-Lite Main Screen.
May 2005
ATC200-Lite Teletilt
Remote Control Downtilt System
®
Figure 3-2. ATC200-Lite Application Icon.
Figure 3-4. Prompt for Serial Port Selection.
Bulletin 639510

Advertisement

Table of Contents
loading

Table of Contents