Page 1
English Headset Quick Guide Français Guide d’installation des micros-casques Español Guía de configuración de los microcascos Quick Start Guide...
Page 2
[2] Boom arm [3] Ear cushions and receivers [4] Headband [5] Clothing clip [6] Headset cord’s Quick Disconnect (QD) NC versions: To avoid transmitting breath- ing noise, fit foam microphone cover onto tip of boom arm. GN2000 Overview Français Mono [1] Micro (omni/NC + bonnette micro) [2] Perche micro [3] Coussinet et écouteur [4] Serre-tête [5] Appui temporal [6] Pince vêtement...
English Setting up [2.1] Remove headset from packaging and untie headset cord. [2.2] Adjust boom arm for left/right ear wearing. Warning: Do not force boom arm beyond built-in stops. [2.3] Put on headset and position ear cushion(s) on ear(s). Note: With monaural headsets, position stabilizer above ear. [2.4] Adjust headband length and position microphone close to your mouth.
English Maintenance To replace the SoundTube, pull used tube out of the upper boom arm and Note: Avoid gently push in new SoundTube until getting moisture or liquids into it fits tightly. any button The headband and boom arm may sockets, recep- tors or other be wiped with a dry or slightly damp openings. Avoid cloth.